Binding problem

I have a vera lite UI5 and a raspberry with OpenHab

I can not receive data from true of openhab

where am I wrong?

I followed many guides but I can not fix the link vera --> openhab

I insered a file in /etc/openhab/configurations/transform



Your config looks openhab.cfg looks correct:

The last two settings are default, so they’re not strictly required (although they won’t hurt either).

Your items declarations look correct, but potentially using an older version of the Item Generator. That should be fine.

For reference, here are my old definitions, just before I stopped using MiOS Weather plugin:

Number   WeatherHumidityId "ID [%d]" {mios="unit:house,device:321/id"}
String   WeatherHumidityDeviceStatus "Device Status [MAP(]" {mios="unit:house,device:321/status"}
Number   WeatherHumidityCurrentLevel "Outside Humidity [%d] %" (GWeather,GMonitorHumidity) {mios="unit:house,device:321/service/HumiditySensor1/CurrentLevel"}

So, based upon the instructions here:

There are a few items that could be missing:
a) Installation of the MiOS Binding itself
If the binding is missing completely, then there will be radio silence in the openHAB log files, otherwise you’ll see evidence of it starting.
If you’re using Linux, and the apt-get install type, then that’s:

sudo apt-get update
sudo apt-get install openhab-addon-binding-mios

b) Installation of the MiOS Binding transformations:

c) What’s in the logs:

The binding will emit diagnostic information if components are missing, and/or having issues with connectivity.

:slight_smile: :slight_smile: :slight_smile: :slight_smile: :slight_smile: :slight_smile: :slight_smile: :slight_smile:

with the commands

sudo apt-get update
sudo apt-get install openhab-addon-binding-mios

I managed to read the humidity sensor


Thank @guessed


Best Home Automation shopping experience. Shop at getvera!

© 2020 Vera Control Ltd., All Rights Reserved. Terms of Use | Privacy Policy | Forum Rules