Errors i have had for years

Could anyone explain these errors and how i might fix them.

02      01/30/20 7:19:08.218    Device_Basic::AddPoll 103 poll list full, deleting old one <0x76fd2520>
02      01/30/20 7:19:42.465    ZWaveNode::HandlePollUpdate_Sensor_Binary_Report node 41 device 108 poll response <0x76fd2520>
02      01/30/20 7:19:46.705    ZWaveNode::HandlePollUpdate_Sensor_Binary_Report node 41 device 106 poll response <0x76fd2520>
04      01/30/20 7:19:50.955    <Job ID="4470" Name="pollnode #41 7 cmds" Device="106" Created="2020-01-30 7:19:38" Started="2020-01-30 7:19:38" Completed="2020-01-30 7:19:50" Duration="12.853407000" Runtime="12.852184000" Status="Successful" LastNote="" Node="41" NodeType="ZWaveMultiEmbedded" NodeDescription="landing"/> <0x76fd2520>
02      01/30/20 7:19:50.955    Device_Basic::AddPoll 106 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:20:12.458    <Job ID="4471" Name="pollnode #28 3 cmds" Device="55" Created="2020-01-30 7:20:08" Started="2020-01-30 7:20:08" Completed="2020-01-30 7:20:12" Duration="4.356554000" Runtime="4.355945000" Status="Successful" LastNote="" Node="28" NodeType="ZWaveMultiEmbedded" NodeDescription="Hall master"/> <0x76fd2520>
02      01/30/20 7:20:12.458    Device_Basic::AddPoll 55 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:20:38.226    <Job ID="4472" Name="pollnode #3 1 cmds" Device="8" Created="2020-01-30 7:20:38" Started="2020-01-30 7:20:38" Completed="2020-01-30 7:20:38" Duration="0.124561000" Runtime="0.123909000" Status="Successful" LastNote="" Node="3" NodeType="ZWaveDimmableLight" NodeDescription="Lounge 1"/> <0x76fd2520>
02      01/30/20 7:20:38.226    Device_Basic::AddPoll 8 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:21:08.214    <Job ID="4473" Name="pollnode #9 1 cmds" Device="44" Created="2020-01-30 7:21:08" Started="2020-01-30 7:21:08" Completed="2020-01-30 7:21:08" Duration="0.112584000" Runtime="0.111646000" Status="Successful" LastNote="" Node="9" NodeType="ZWaveDimmableLight" NodeDescription="Bedroom1 Main"/> <0x76fd2520>
02      01/30/20 7:21:08.214    Device_Basic::AddPoll 44 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:21:38.226    <Job ID="4474" Name="pollnode #10 1 cmds" Device="31" Created="2020-01-30 7:21:38" Started="2020-01-30 7:21:38" Completed="2020-01-30 7:21:38" Duration="0.124547000" Runtime="0.123561000" Status="Successful" LastNote="" Node="10" NodeType="ZWaveDimmableLight" NodeDescription="Lounge 2"/> <0x76fd2520>
02      01/30/20 7:21:38.226    Device_Basic::AddPoll 31 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:22:08.222    <Job ID="4475" Name="pollnode #18 1 cmds" Device="38" Created="2020-01-30 7:22:08" Started="2020-01-30 7:22:08" Completed="2020-01-30 7:22:08" Duration="0.120542000" Runtime="0.118913000" Status="Successful" LastNote="" Node="18" NodeType="ZWaveDimmableLight" NodeDescription="Dining"/> <0x76fd2520>
02      01/30/20 7:22:08.222    Device_Basic::AddPoll 38 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:22:38.226    <Job ID="4476" Name="pollnode #20 1 cmds" Device="40" Created="2020-01-30 7:22:38" Started="2020-01-30 7:22:38" Completed="2020-01-30 7:22:38" Duration="0.124624000" Runtime="0.123476000" Status="Successful" LastNote="" Node="20" NodeType="ZWaveDimmableLight" NodeDescription="Bath Up"/> <0x76fd2520>
02      01/30/20 7:22:38.226    Device_Basic::AddPoll 40 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:23:08.222    <Job ID="4477" Name="pollnode #21 1 cmds" Device="41" Created="2020-01-30 7:23:08" Started="2020-01-30 7:23:08" Completed="2020-01-30 7:23:08" Duration="0.120616000" Runtime="0.119413000" Status="Successful" LastNote="" Node="21" NodeType="ZWaveDimmableLight" NodeDescription="kitchen Under"/> <0x76fd2520>
02      01/30/20 7:23:08.222    Device_Basic::AddPoll 41 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:23:38.314    <Job ID="4478" Name="pollnode #23 1 cmds" Device="43" Created="2020-01-30 7:23:38" Started="2020-01-30 7:23:38" Completed="2020-01-30 7:23:38" Duration="0.212656000" Runtime="0.211600000" Status="Successful" LastNote="" Node="23" NodeType="ZWaveDimmableLight" NodeDescription="Kitchen Main"/> <0x76fd2520>
02      01/30/20 7:23:38.314    Device_Basic::AddPoll 43 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:24:08.374    <Job ID="4479" Name="pollnode #30 1 cmds" Device="82" Created="2020-01-30 7:24:08" Started="2020-01-30 7:24:08" Completed="2020-01-30 7:24:08" Duration="0.272093000" Runtime="0.270789000" Status="Successful" LastNote="" Node="30" NodeType="ZWaveDimmableLight" NodeDescription="Kitchen Pendants"/> <0x76fd2520>
02      01/30/20 7:24:08.374    Device_Basic::AddPoll 82 poll list full, deleting old one <0x76fd2520>
04      01/30/20 7:24:38.224    <Job ID="4480" Name="pollnode #33 1 cmds" Device="85" Created="2020-01-30 7:24:38" Started="2020-01-30 7:24:38" Completed="2020-01-30 7:24:38" Duration="0.122589000" Runtime="0.121690000" Status="Successful" LastNote="" Node="33" NodeType="ZWaveDimmableLight" NodeDescription="Bedroom1 wall"/> <0x76fd2520>
02      01/30/20 7:24:38.224    Device_Basic::AddPoll 85 poll list full, deleting old one <0x76fd2520>
01      01/30/20 7:25:01.959    got CAN <0x765d2520>
02      01/30/20 7:25:01.959    ZWaveSerial::Send m_iFrameID 28766 got a CAN -- Dongle is in a bad state.  Wait 1 second before continuing to let it try to recover. <0x769d2520>
04      01/30/20 7:25:18.220    <Job ID="4482" Name="pollnode #39 1 cmds" Device="103" Created="2020-01-30 7:25:18" Started="2020-01-30 7:25:18" Completed="2020-01-30 7:25:18" Duration="0.118061000" Runtime="0.116646000" Status="Successful" LastNote="" Node="39" NodeType="ZWaveNonDimmableLight" NodeDescription="shower room"/> <0x76fd2520>
02      01/30/20 7:25:18.220    Device_Basic::AddPoll 103 poll list full, deleting old one <0x76fd2520>
02      01/30/20 7:25:52.511    ZWaveNode::HandlePollUpdate_Sensor_Binary_Report node 41 device 108 poll response <0x76fd2520>
02      01/30/20 7:25:56.735    ZWaveNode::HandlePollUpdate_Sensor_Binary_Report node 41 device 106 poll response <0x76fd2520>
04      01/30/20 7:26:00.988    <Job ID="4483" Name="pollnode #41 7 cmds" Device="106" Created="2020-01-30 7:25:48" Started="2020-01-30 7:25:48" Completed="2020-01-30 7:26:00" Duration="12.887378000" Runtime="12.

Never seen these as errors, more information. There’s no point in keeping every poll date and time so let the list ‘fill’ and then just bin it.

Interested to see if I’m completely wrong, now

C

catman they are in yellow so are warning errors, Also i only get these devices and not the other powered devices i have. From the times the list can not be full again so quickly can it?

Sometime these warning errors are followed by a red error and reload.

Well I wouldn’t necessarily take the colour code as gospel

Not sure about the list being full so quickly. My assumption was that each device has its own poll queue. Each one of these entries is for a different device, no?

C

catman

yes each one is a different device, but its always these 12 devices and never others. Also they seem to be shortly after each other, i.e device 8 deletes poll list at 13.18 and again at 13.24 and again at 13.31. so its deleting the list every 6mins

I see

I’ll let someone else chip in :slight_smile:

An obvious answer would be to reduce the polling frequency, but no idea what other impact that might have

C

Are they all the same device models?
If so I would recommend to disable polling on these as it is likely that they do not need it. (Set the polling interval variable to “0” and reload luup)

No, they are mostly dimmer inserts generic. 1 qubino dimmer insert. 1 aoetec binary insert and a 2 channel generic insert.

I will set polling to 0

What is this error and how to fix?

UserData::WriteUserData saved--before move File Size: 57417 save size 57417 <0x7706a520>
02	02/01/20 5:33:29.205	UserData::TempLogFileSystemFailure start 0 <0x7706a520>
02	02/01/20 5:33:29.227	UserData::TempLogFileSystemFailure 5783 res:1
-rw-r--r--    1 root     root            33 Apr 29  2019 /etc/cmh/HW_Key
-rw-r--r--    1 root     root            32 Mar  3  2017 /etc/cmh/HW_Key2
-rw-r--r--    1 root     root             9 Apr 29  2019 /etc/cmh/PK_AccessPoint

These are not errors per say. They are reporting a rotation and writing of the user-data and can be safely ignored.

Its the

TempLogFileSystemFailure

That makes it look like an error, would it be better not to flag it red and actually say writing user data.

One more question how often should this occur?

Best Home Automation shopping experience. Shop at getvera!

© 2020 Vera Control Ltd., All Rights Reserved. Terms of Use | Privacy Policy