Ezlo Platform supported 2 Gig Devices

Hi All,

In our Ezlo Platform we are ofcourse not forgetting also 2Gig devices. Here you can see our current progress and our short term plan for how to integrate them.

We will be updating this post after each release.


You can see the %age coverage of 2Gig devices in visual format and how we make progress for each release. “S” above means “Sprint” which is a development cycle.

Integrated Devices:

# Manufacturer Name Model Number
1 2Gig Keyfob KEY2-345
2 2Gig Panic Button PANIC1-345
3 2Gig Door & Window Sensor DW10-345
4 2Gig CO Detector CO3-345
5 2Gig Glass Break Sensor GB1-345
6 2Gig Tilt Sensor TILT1-345
7 2Gig Motion Detector PIR1-345
8 2Gig Flood and Temperature Sensor FT1-345
9 2Gig Smoke Detector SMKT3-345

Great work guys!
keep giving transparency and visibility to our users.

Wait, what? I didn’t know 2 Gig was a go-forward for Elzo. Is this just for the VeraSecure (which I have) or is 2 Gig being built into future controllers?

already done! New Ezlo Controllers have it and the list of supported devices are in the original post

1 Like

Hmmm In Europe we don’t use 2Gig… what about 433mhz??

1 Like

Awesome! But I sure hope more supported devices are coming. I use three 2 Gig models on the VeraSecure under UI7, and so far none are on the Elzo Platform list.

  • Smoke Ring GIG-SDS1-345 (really cool - nothing currently like it available for Z-wave or ZigBee)
  • Doorbell 2GIG-DBELL1-345 (really cool - nothing currently like it available for Z-wave or ZigBee)
  • Recessed Door/Window 2GIG-DW20R-345 (I wanted sensors that were faster than Z-Wave or ZigBee - non mesh - and have three of them mounted in bathroom doors to allow me to trigger Z-Wave switches that control bathroom fans.)

Now if we can just get the EnOcean plug-in ported to Elzo, I can move to Elzo without losing any of my UI7 primary technologies. There isn’t a competing system that I know of which would support all of these technologies.

VeraLink (AKA 2 Gig) is 433 Mhz in the the EU, but this doesn’t mean generic 433 Mhz devices, just the specific devices supported. If you want generic 433 Mhz, you would want to look at the RFXtrx controller plug-in.

1 Like

Please put every device you want us to support in the wish list post we created, we will be happy to oblige and keep you informed about its progress.

1 Like

I Know . But having all 433mhz device native in ezlo feens like a mission impossible. Better then to have the rfxtrx native and problem solved. In my Vera plus i have a rfxtrx… This 2gig is one of 10000 433 brands…

1 Like

Virtual Device and integration with devices like Broadlink
This way you can create a Virtual device on your Ezlo platform for any 433MHz device supported by these 433MHz bridges

1 Like

@melih , Hmmm, sounds like a smart solution but I assume it integrates via VOI? That would make it cloud dependent, isn’t it? (Hopefully I’m wrong)

VOI is a smart solution but if possible I prefer a local radio for 433Mhz devices. I think many users have the RFXcom radio with the plug-in.

2 Likes

we have two phases…
phase 1…Virtual Devices cloud dependent
phase 2…Virtual Devices local (for things that can be local). So lets say you are using Broadlink IR/RF device, we will be, at phase 2, integrating with this device to work locally. So anything you create as a “Virtual Device” will work locally if the integration is done locally.

Our design philosophy is to architect it to work locally if it can be done.

@Melih, Thanks, that is good news. I will add my 433 MHz devices to the wish list.

2 Likes

@Melih, From what I read the 2Gig support will only be on the Ezlo Plus Plus, correct?

Yes, only Vera Secure has 2GIG support.

1 Like

So Ezlo Plus Plus is now called Ezlo Secure? Very confusing how you name your new devices and also extremely original :grin:

Best Home Automation shopping experience. Shop at getvera!

© 2020 Vera Control Ltd., All Rights Reserved. Terms of Use | Privacy Policy | Forum Rules