[quote=“CudaNet, post:60, topic:193746”]Morning AK, so hoping this is what you were expecting…
http://10.0.4.45:3480/data_request?id=lr_z5
[]
[/quote]
…sadly, not. There should be reams of device information.
My way forward could well be to update my own system (and no doubt break it, thus giving me extra incentive to sort this out.)
Well I certainly don’t want you to have to do that… I have Dataplicity set up, I could provide you a direct link with a UserName/Password.
[quote=“akbooer, post:61, topic:193746”][quote=“CudaNet, post:60, topic:193746”]Morning AK, so hoping this is what you were expecting…
http://10.0.4.45:3480/data_request?id=lr_z5
[]
[/quote]
…sadly, not. There should be reams of device information.
My way forward could well be to update my own system (and no doubt break it, thus giving me extra incentive to sort this out.)[/quote]
I did the update to 2.3.5, which also recommended that I update my RPi firmware, so I did that too…
#############################################################
This update bumps to rpi-4.9.y linux tree
Be aware there could be compatibility issues with some drivers
Discussion here:
https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=167934
##############################################################
*** Downloading specific firmware revision (this will take a few minutes)
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 168 0 168 0 0 400 0 --:--:-- --:--:-- --:--:-- 401
100 54.1M 100 54.1M 0 0 837k 0 0:01:06 0:01:06 --:--:-- 1556k
*** Updating firmware
*** Updating kernel modules
*** depmod 4.9.52-v7+
*** depmod 4.9.52+
*** Updating VideoCore libraries
*** Using HardFP libraries
*** Updating SDK
*** Running ldconfig
*** Storing current firmware revision
*** Deleting downloaded files
*** Syncing changes to disk
*** If no errors appeared, your firmware was successfully updated to 2169dbafa715d4a7cfcd3dcf78a15f82fecae2a6
*** A reboot is needed to activate the new firmware
pi@raspberrypi:~ $ …and everything still works just fine.
So there must be something quite special up with your system - looks like I’ll need access.
Well that’s good news… Perhaps I overlooked something… Sending you a PM with the URL link to the offender !
[quote=“akbooer, post:63, topic:193746”]I did the update to 2.3.5, which also recommended that I update my RPi firmware, so I did that too…
#############################################################
This update bumps to rpi-4.9.y linux tree
Be aware there could be compatibility issues with some drivers
Discussion here:
https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=167934
##############################################################
*** Downloading specific firmware revision (this will take a few minutes)
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 168 0 168 0 0 400 0 --:--:-- --:--:-- --:--:-- 401
100 54.1M 100 54.1M 0 0 837k 0 0:01:06 0:01:06 --:--:-- 1556k
*** Updating firmware
*** Updating kernel modules
*** depmod 4.9.52-v7+
*** depmod 4.9.52+
*** Updating VideoCore libraries
*** Using HardFP libraries
*** Updating SDK
*** Running ldconfig
*** Storing current firmware revision
*** Deleting downloaded files
*** Syncing changes to disk
*** If no errors appeared, your firmware was successfully updated to 2169dbafa715d4a7cfcd3dcf78a15f82fecae2a6
*** A reboot is needed to activate the new firmware
pi@raspberrypi:~ $ …and everything still works just fine.
So there must be something quite special up with your system - looks like I’ll need access.[/quote]
I’m hoping this file fixes the error, but I still don’t know why the error is happening and why it didn’t before.
You’ll let me know, of course, …
Loaded and appears to be stuck in a loop. I stopped the process …
root@openLuup:/etc/cmh-ludl# ./openLuup_reload
Tue Oct 3 07:48:13 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:16 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:18 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:20 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:22 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:24 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:26 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:28 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:30 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:32 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:35 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:37 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:39 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:41 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:43 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:45 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:47 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:49 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:52 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:54 2017 device 5 'Z-Way' requesting reload
Tue Oct 3 07:48:56 2017 device 5 'Z-Way' requesting reload
^Clua5.1: ./openLuup/userdata.lua:600: attempt to index local 'dev' (a nil value)
stack traceback:Update: Log data…
2017-10-03 07:51:16.244 :: openLuup LOG ROTATION :: (runtime 0.0 days)
2017-10-03 07:51:16.245 openLuup.init:: init phase completed
2017-10-03 07:51:16.245 openLuup.server:: starting HTTP server on 10.0.4.45:3480 tcp{server}: 0xb80498
2017-10-03 07:51:16.245 openLuup.scheduler:: starting
2017-10-03 07:51:16.245 openLuup.scheduler:: [2] openLuup device startup
2017-10-03 07:51:16.245 luup_log:2: synch in 43.8 s
2017-10-03 07:51:16.245 luup.variable_set:2: 2.urn:upnp-org:serviceId:altui1.DisplayLine2 was: EMPTY now: #hooks:0
2017-10-03 07:51:16.246 luup.variable_set:2: 2.openLuup.Version was: EMPTY now: v17.3.9 #hooks:0
2017-10-03 07:51:16.246 luup_log:2: v17.3.9
2017-10-03 07:51:16.246 luup.chdev.append:: [AltAppStore] Alternate App Store
2017-10-03 07:51:16.246 luup.chdev.sync:: [2] openLuup, syncing children
2017-10-03 07:51:16.246 luup.variable_set:2: 2.openLuup.Memory_Mb was: EMPTY now: 4 #hooks:0
2017-10-03 07:51:16.246 luup.variable_set:2: 2.openLuup.CpuLoad was: EMPTY now: 0.5 #hooks:0
2017-10-03 07:51:16.246 luup.variable_set:2: 2.openLuup.Uptime_Days was: EMPTY now: 0 #hooks:0
2017-10-03 07:51:16.247 luup.variable_set:2: 2.urn:upnp-org:serviceId:altui1.DisplayLine1 was: EMPTY now: 4 Mb, cpu 0.5%, 0 days #hooks:0
2017-10-03 07:51:16.247 luup_log:2: 4 Mb, cpu 0.5%, 0 days
2017-10-03 07:51:16.247 luup.variable_set:2: 2.openLuup.MemFree_Mb was: EMPTY now: 758.5 #hooks:0
2017-10-03 07:51:16.248 luup.variable_set:2: 2.openLuup.MemAvail_Mb was: EMPTY now: 838.6 #hooks:0
2017-10-03 07:51:16.248 luup.variable_set:2: 2.openLuup.MemTotal_Mb was: EMPTY now: 947.7 #hooks:0
2017-10-03 07:51:16.248 openLuup.scheduler:: [2] openLuup device startup completed: status=true, msg=synch in 43.8 s, name=L_openLuup
2017-10-03 07:51:16.248 openLuup.scheduler:: [3] Alternate UI device startup
2017-10-03 07:51:16.248 luup_log:3: ALTUI: initstatus(3) starting version: v1.92
2017-10-03 07:51:16.248 openLuup.scheduler:: [3] Alternate UI device startup completed: status=nil, msg=nil, name=nil
2017-10-03 07:51:16.248 openLuup.scheduler:: [4] Alternate App Store device startup
2017-10-03 07:51:16.248 luup_log:4: AltAppStore : starting...
2017-10-03 07:51:16.248 luup.variable_set:4: 4.urn:upnp-org:serviceId:altui1.DisplayLine1 was: AltAppStore now: AltAppStore #hooks:0
2017-10-03 07:51:16.249 luup.variable_set:4: 4.urn:upnp-org:serviceId:altui1.DisplayLine2 was: now: #hooks:0
2017-10-03 07:51:16.249 luup_log:4: AltAppStore : v16.11.23
2017-10-03 07:51:16.249 luup.set_failure:4: status = 0
2017-10-03 07:51:16.249 luup.variable_set:4: 4.urn:micasaverde-com:serviceId:HaDevice1.CommFailure was: 0 now: 0 #hooks:0
2017-10-03 07:51:16.249 luup.variable_set:4: 4.urn:micasaverde-com:serviceId:HaDevice1.CommFailureTime was: 0 now: 0 #hooks:0
2017-10-03 07:51:16.249 openLuup.scheduler:: [4] Alternate App Store device startup completed: status=true, msg=OK, name=AltAppStore
2017-10-03 07:51:16.249 openLuup.scheduler:: [5] Z-Way device startup
2017-10-03 07:51:16.249 luup_log:5: ZWay: v17.10.3
2017-10-03 07:51:16.276 luup.variable_set:5: 5.urn:upnp-org:serviceId:altui1.DisplayLine1 was: 168 vDevs, 50 nodes now: #hooks:0
2017-10-03 07:51:16.276 luup.set_failure:5: status = 0
2017-10-03 07:51:16.276 luup.variable_set:5: 5.urn:micasaverde-com:serviceId:HaDevice1.CommFailure was: 0 now: 0 #hooks:0
2017-10-03 07:51:16.276 luup.variable_set:5: 5.urn:micasaverde-com:serviceId:HaDevice1.CommFailureTime was: 0 now: 0 #hooks:0
2017-10-03 07:51:16.276 luup.register_handler:5: global_function_name=HTTP_Z-Way_5, request=z5
2017-10-03 07:51:16.500 luup.chdev.append:: [71-0-38] 71: Leviton Dimmable
2017-10-03 07:51:16.507 luup.chdev.append:: [43-0-37] 43: Den Binary
2017-10-03 07:51:16.511 luup.chdev.append:: [51] 51: Master Combo
2017-10-03 07:51:16.516 luup.chdev.append:: [75-0-48-1] 75: Fibaro Motion
2017-10-03 07:51:16.530 luup.chdev.append:: [47-0-98] 47: Back Door
2017-10-03 07:51:16.537 luup.chdev.append:: [55-0-37] 55: Guest Binary
2017-10-03 07:51:16.544 luup.chdev.append:: [45-0-37] 45: Arbor Binary
2017-10-03 07:51:16.551 luup.chdev.append:: [57-0-37] 57: Guest Binary
2017-10-03 07:51:16.558 luup.chdev.append:: [39-0-37] 39: Attic Binary
2017-10-03 07:51:16.562 luup.chdev.append:: [29] 29: Outdoor Combo
2017-10-03 07:51:16.569 luup.chdev.append:: [69-0-37] 69: Switch Binary
2017-10-03 07:51:16.573 luup.chdev.append:: [?] 0: 0 Controller
2017-10-03 07:51:16.574 luup.create_device:: [422] D_SceneController1.xml / / D_SceneController1.json
2017-10-03 07:51:16.588 luup.chdev.append:: [3-0-98] 3: Front Door
2017-10-03 07:51:16.596 luup.chdev.append:: [2-0-37] 2: Zooz Binary
2017-10-03 07:51:16.648 luup.chdev.append:: [5-0-38] 5: Lounge Dimmable
2017-10-03 07:51:16.700 luup.chdev.append:: [4-0-38] 4: Office Dimmable
2017-10-03 07:51:16.751 luup.chdev.append:: [7-0-38] 7: Front Dimmable
2017-10-03 07:51:16.757 luup.chdev.append:: [9-0-48-1] 9: Storm Motion
2017-10-03 07:51:16.765 luup.chdev.append:: [8-0-37] 8: Porch Binary
2017-10-03 07:51:16.772 luup.chdev.append:: [27-0-37] 27: Hallway Binary
2017-10-03 07:51:16.780 luup.chdev.append:: [31-0-37] 31: Security Binary
2017-10-03 07:51:16.786 luup.chdev.append:: [33-0-48-1] 33: Wiring Motion
2017-10-03 07:51:16.790 luup.chdev.append:: [23] 23: Foyer Combo
2017-10-03 07:51:16.797 luup.chdev.append:: [42-0-37] 42: Den Binary
2017-10-03 07:51:16.803 luup.chdev.append:: [52] 52: Den Combo
2017-10-03 07:51:16.810 luup.chdev.append:: [62] 62: Media Combo
2017-10-03 07:51:16.882 luup.chdev.append:: [72-0-38] 72: Leviton Dimmable
2017-10-03 07:51:16.897 luup.chdev.append:: [54-0-98] 54: Wiring Door
2017-10-03 07:51:16.904 luup.chdev.append:: [46-0-37] 46: Garage Binary
2017-10-03 07:51:16.911 luup.chdev.append:: [56-0-37] 56: Guest Binary
2017-10-03 07:51:16.918 luup.chdev.append:: [44-0-37] 44: Den Binary
2017-10-03 07:51:16.922 luup.chdev.append:: [58] 58: Guest Combo
2017-10-03 07:51:16.929 luup.chdev.append:: [28-0-37] 28: Abby Binary
2017-10-03 07:51:16.936 luup.chdev.append:: [38-0-37] 38: Lounge Binary
2017-10-03 07:51:16.986 luup.chdev.append:: [77-0-38] 77: Aeotec Dimmable
2017-10-03 07:51:17.037 luup.chdev.append:: [76-0-38] 76: Aeotec Dimmable
2017-10-03 07:51:17.044 luup.chdev.append:: [74-0-37] 74: Switch Binary
2017-10-03 07:51:17.094 luup.chdev.append:: [73-0-38] 73: Leviton Dimmable
2017-10-03 07:51:17.101 luup.chdev.append:: [67-0-37] 67: Switch Binary
2017-10-03 07:51:17.105 luup.chdev.append:: [63] 63: Garage Combo
2017-10-03 07:51:17.155 luup.chdev.append:: [61-0-38] 61: Guest Dimmable
2017-10-03 07:51:17.162 luup.chdev.append:: [60-0-37] 60: Pergola Binary
2017-10-03 07:51:17.169 luup.chdev.append:: [50-0-37] 50: Master Binary
2017-10-03 07:51:17.173 luup.chdev.append:: [24] 24: Hallway Combo
2017-10-03 07:51:17.179 luup.chdev.append:: [41-0-37] 41: Abby Binary
2017-10-03 07:51:17.186 luup.chdev.append:: [26-0-37] 26: Indoor Binary
2017-10-03 07:51:17.193 luup.chdev.append:: [25-0-37] 25: Hallway Binary
2017-10-03 07:51:17.200 luup.chdev.append:: [30-0-37] 30: Switch Binary
2017-10-03 07:51:17.204 luup.chdev.append:: [22] 22: Attic Combo
2017-10-03 07:51:17.207 luup.chdev.append:: [32] 32: Wiring Combo
2017-10-03 07:51:17.207 luup.chdev.sync:: [5] Z-Way, syncing children
2017-10-03 07:51:17.207 openLuup.chdev:: deleting [421] 0: 0 Controller
2017-10-03 07:51:17.208 luup.variable_set:5: 5.urn:upnp-org:serviceId:altui1.DisplayLine1 was: now: 168 vDevs, 50 nodes #hooks:0
2017-10-03 07:51:17.208 luup.chdev.sync:: [6] 71: Leviton Dimmable, syncing children
2017-10-03 07:51:17.208 luup.chdev.sync:: [7] 43: Den Binary, syncing children
2017-10-03 07:51:17.213 luup.chdev.append:: [51-0-48-1] 51: Master Motion
2017-10-03 07:51:17.225 luup.chdev.append:: [51-0-49-1] 51: Master Temperature
2017-10-03 07:51:17.229 luup.chdev.append:: [51-0-49-3] 51: Master Light
2017-10-03 07:51:17.234 luup.chdev.append:: [51-0-49-5] 51: Master Humidity
2017-10-03 07:51:17.238 luup.chdev.append:: [51-0-49-27] 51: Master UVSensor
2017-10-03 07:51:17.238 luup.chdev.sync:: [8] 51: Master Combo, syncing children
2017-10-03 07:51:17.238 luup.chdev.sync:: [9] 75: Fibaro Motion, syncing children
2017-10-03 07:51:17.238 luup.chdev.sync:: [10] 47: Back Door, syncing children
2017-10-03 07:51:17.238 luup.chdev.sync:: [11] 55: Guest Binary, syncing children
2017-10-03 07:51:17.238 luup.chdev.sync:: [12] 45: Arbor Binary, syncing children
2017-10-03 07:51:17.239 luup.chdev.sync:: [13] 57: Guest Binary, syncing children
2017-10-03 07:51:17.239 luup.chdev.sync:: [14] 39: Attic Binary, syncing children
2017-10-03 07:51:17.246 luup.chdev.append:: [29-0-37] 29: Outdoor Binary
2017-10-03 07:51:17.251 luup.chdev.append:: [29-0-48-1] 29: Fortrezz Motion
2017-10-03 07:51:17.251 luup.chdev.sync:: [15] 29: Outdoor Combo, syncing children
2017-10-03 07:51:17.251 luup.chdev.sync:: [16] 69: Landscape [W], syncing children
2017-10-03 07:51:17.251 luup.chdev.sync:: [18] 3: Front Door, syncing children
2017-10-03 07:51:17.251 luup.chdev.sync:: [19] 2: Zooz Binary, syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [20] 5: Lounge Dimmable, syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [21] 4: Office Dimmable, syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [22] 7: Landscape [S], syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [23] 9: Storm Motion, syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [24] 8: Porch Binary, syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [25] 27: Hallway Binary, syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [26] 31: Security Binary, syncing children
2017-10-03 07:51:17.252 luup.chdev.sync:: [27] 33: Wiring Motion, syncing children
2017-10-03 07:51:17.258 luup.chdev.append:: [23-0-48-1] 23: Foyer Motion
2017-10-03 07:51:17.271 luup.chdev.append:: [23-0-49-1] 23: Foyer Temperature
2017-10-03 07:51:17.276 luup.chdev.append:: [23-0-49-3] 23: Foyer Light
2017-10-03 07:51:17.280 luup.chdev.append:: [23-0-49-5] 23: Foyer Humidity
2017-10-03 07:51:17.285 luup.chdev.append:: [23-0-49-27] 23: Foyer UVSensor
2017-10-03 07:51:17.285 luup.chdev.sync:: [28] 23: Foyer Combo, syncing children
2017-10-03 07:51:17.285 luup.chdev.sync:: [29] 42: Den Binary, syncing children
2017-10-03 07:51:17.291 luup.chdev.append:: [52-0-48-1] 52: Den Motion
2017-10-03 07:51:17.304 luup.chdev.append:: [52-0-49-1] 52: Den Temperature
2017-10-03 07:51:17.308 luup.chdev.append:: [52-0-49-3] 52: Den Light
2017-10-03 07:51:17.313 luup.chdev.append:: [52-0-49-5] 52: Den Humidity
2017-10-03 07:51:17.317 luup.chdev.append:: [52-0-49-27] 52: Den UVSensor
2017-10-03 07:51:17.317 luup.chdev.sync:: [30] 52: Den Combo, syncing children
2017-10-03 07:51:17.323 luup.chdev.append:: [62-0-48-1] 62: Media Motion
2017-10-03 07:51:17.336 luup.chdev.append:: [62-0-49-1] 62: Media Temperature
2017-10-03 07:51:17.340 luup.chdev.append:: [62-0-49-5] 62: Media Humidity
2017-10-03 07:51:17.345 luup.chdev.append:: [62-0-49-3] 62: Media Light
2017-10-03 07:51:17.350 luup.chdev.append:: [62-0-49-27] 62: Media UVSensor
2017-10-03 07:51:17.350 luup.chdev.sync:: [31] 62: Media Combo, syncing children
2017-10-03 07:51:17.350 luup.chdev.sync:: [32] 72: Leviton Dimmable, syncing children
2017-10-03 07:51:17.350 luup.chdev.sync:: [33] 54: Wiring Door, syncing children
2017-10-03 07:51:17.350 luup.chdev.sync:: [34] 46: Garage Binary, syncing children
2017-10-03 07:51:17.351 luup.chdev.sync:: [35] 56: Guest Binary, syncing children
2017-10-03 07:51:17.351 luup.chdev.sync:: [36] 44: Den Binary, syncing children
2017-10-03 07:51:17.357 luup.chdev.append:: [58-0-48-1] 58: Guest Motion
2017-10-03 07:51:17.369 luup.chdev.append:: [58-0-49-1] 58: Guest Temperature
2017-10-03 07:51:17.374 luup.chdev.append:: [58-0-49-3] 58: Guest Light
2017-10-03 07:51:17.379 luup.chdev.append:: [58-0-49-5] 58: Guest Humidity
2017-10-03 07:51:17.385 luup.chdev.append:: [58-0-49-27] 58: Guest UVSensor
2017-10-03 07:51:17.385 luup.chdev.sync:: [37] 58: Guest Combo, syncing children
2017-10-03 07:51:17.385 luup.chdev.sync:: [38] 28: Abby Binary, syncing children
2017-10-03 07:51:17.385 luup.chdev.sync:: [39] 38: Lounge Binary, syncing children
2017-10-03 07:51:17.385 luup.chdev.sync:: [40] 77: Aeotec Dimmable, syncing children
2017-10-03 07:51:17.386 luup.chdev.sync:: [41] 76: Aeotec Dimmable, syncing children
2017-10-03 07:51:17.386 luup.chdev.sync:: [42] 74: Landscape [N], syncing children
2017-10-03 07:51:17.386 luup.chdev.sync:: [43] 73: Leviton Dimmable, syncing children
2017-10-03 07:51:17.386 luup.chdev.sync:: [44] 67: Switch Binary, syncing children
2017-10-03 07:51:17.397 luup.chdev.append:: [63-0-48-1] 63: Garage Motion
2017-10-03 07:51:17.419 luup.chdev.append:: [63-0-49-1] 63: Garage Temperature
2017-10-03 07:51:17.432 luup.chdev.append:: [63-0-49-3] 63: Garage Light
2017-10-03 07:51:17.439 luup.chdev.append:: [63-0-49-5] 63: Garage Humidity
2017-10-03 07:51:17.443 luup.chdev.append:: [63-0-49-27] 63: Garage UVSensor
2017-10-03 07:51:17.444 luup.chdev.sync:: [45] 63: Garage Combo, syncing children
2017-10-03 07:51:17.444 luup.chdev.sync:: [46] 61: Guest Dimmable, syncing children
2017-10-03 07:51:17.444 luup.chdev.sync:: [47] 60: Pergola Binary, syncing children
2017-10-03 07:51:17.444 luup.chdev.sync:: [48] 50: Master Binary, syncing children
2017-10-03 07:51:17.449 luup.chdev.append:: [24-0-48-1] 24: Hallway Motion
2017-10-03 07:51:17.462 luup.chdev.append:: [24-0-49-1] 24: Hallway Temperature
2017-10-03 07:51:17.466 luup.chdev.append:: [24-0-49-3] 24: Hallway Light
2017-10-03 07:51:17.470 luup.chdev.append:: [24-0-49-5] 24: Hallway Humidity
2017-10-03 07:51:17.475 luup.chdev.append:: [24-0-49-27] 24: Hallway UVSensor
2017-10-03 07:51:17.475 luup.chdev.sync:: [49] 24: Hallway Combo, syncing children
2017-10-03 07:51:17.475 luup.chdev.sync:: [50] 41: Abby Binary, syncing children
2017-10-03 07:51:17.475 luup.chdev.sync:: [51] 26: Indoor Binary, syncing children
2017-10-03 07:51:17.475 luup.chdev.sync:: [52] 25: Hallway Binary, syncing children
2017-10-03 07:51:17.475 luup.chdev.sync:: [53] 30: Switch Binary, syncing children
2017-10-03 07:51:17.481 luup.chdev.append:: [22-0-48-1] 22: Attic Motion
2017-10-03 07:51:17.493 luup.chdev.append:: [22-0-49-1] 22: Attic Temperature
2017-10-03 07:51:17.497 luup.chdev.append:: [22-0-49-3] 22: Attic Light
2017-10-03 07:51:17.497 luup.chdev.sync:: [54] 22: Attic Combo, syncing children
2017-10-03 07:51:17.503 luup.chdev.append:: [32-0-48-1] 32: Wiring Motion
2017-10-03 07:51:17.515 luup.chdev.append:: [32-0-49-1] 32: Wiring Temperature
2017-10-03 07:51:17.519 luup.chdev.append:: [32-0-49-3] 32: Wiring Light
2017-10-03 07:51:17.519 luup.chdev.sync:: [55] 32: Wiring Combo, syncing children
2017-10-03 07:51:17.520 luup.chdev.sync:: [422] 0: 0 Controller, syncing children
2017-10-03 07:51:17.520 openLuup.luup:5: device 5 'Z-Way' requesting reload
2017-10-03 07:51:17.520 luup.reload:5: saving user_data
2017-10-03 07:51:17.656 openLuup.luup:5: exiting with code 42 - after 0.0 hours[quote=“akbooer, post:65, topic:193746”]I’m hoping this file fixes the error, but I still don’t know why the error is happening and why it didn’t before.
You’ll let me know, of course, …[/quote]
Ah, I’ll need the log file from one of those iterations, please.
Yes, sorry about that… I added the UPnP log above and here one of the Startup logs (they’re the same for all)…
2017-10-03 07:51:17.675 :: openLuup STARTUP ::
2017-10-03 07:51:17.675 openLuup.init:: version 2016.12.10 @akbooer
2017-10-03 07:51:17.708 openLuup.scheduler:: version 2017.02.22 @akbooer
2017-10-03 07:51:17.710 openLuup.wsapi:: version 2017.01.12 @akbooer
2017-10-03 07:51:17.710 openLuup.server:: version 2017.03.03 @akbooer
2017-10-03 07:51:17.716 openLuup.rooms:: version 2016.06.23 @akbooer
2017-10-03 07:51:17.720 openLuup.scenes:: version 2017.01.15 @akbooer
2017-10-03 07:51:17.725 openLuup.chdev:: version 2016.11.02 @akbooer
2017-10-03 07:51:17.725 openLuup.userdata:: version 2016.11.15 @akbooer
2017-10-03 07:51:17.726 openLuup.requests:: version 2017.02.05 @akbooer
2017-10-03 07:51:17.727 openLuup.io:: version 2016.11.09 @akbooer
2017-10-03 07:51:17.727 openLuup.luup:: version 2016.12.06 @akbooer
2017-10-03 07:51:17.729 luup.create_device:: [1] D_ZWaveNetwork.xml / /
2017-10-03 07:51:17.737 luup.create_device:: [2] D_openLuup.xml / I_openLuup.xml / D_openLuup.json
2017-10-03 07:51:17.738 openLuup.init:: loading configuration user_data.json
2017-10-03 07:51:17.741 openLuup.userdata:: loading user_data json...
2017-10-03 07:51:17.955 openLuup.userdata:: loading rooms...
2017-10-03 07:51:17.955 openLuup.userdata:: ...room loading completed
2017-10-03 07:51:17.955 openLuup.userdata:: loading devices...
2017-10-03 07:51:17.955 luup.create_device:: [1] D_ZWaveNetwork.xml / /
2017-10-03 07:51:18.026 luup.create_device:: [3] D_ALTUI.xml / I_ALTUI.xml / D_ALTUI_UI7.json
2017-10-03 07:51:18.034 luup.create_device:: [4] D_AltAppStore.xml / I_AltAppStore.xml / D_AltAppStore.json
2017-10-03 07:51:18.056 luup.create_device:: [5] D_ZWay.xml / I_ZWay.xml / D_ZWay.json
2017-10-03 07:51:18.120 luup.create_device:: [6] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.132 luup.create_device:: [7] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.135 luup.create_device:: [8] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.147 luup.create_device:: [9] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.172 luup.create_device:: [10] D_DoorLock1.xml / / D_DoorLock1.json
2017-10-03 07:51:18.174 luup.create_device:: [11] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.177 luup.create_device:: [12] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.181 luup.create_device:: [13] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.184 luup.create_device:: [14] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.186 luup.create_device:: [15] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.188 luup.create_device:: [16] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.189 luup.create_device:: [18] D_DoorLock1.xml / / D_DoorLock1.json
2017-10-03 07:51:18.190 luup.create_device:: [19] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.192 luup.create_device:: [20] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.194 luup.create_device:: [21] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.196 luup.create_device:: [22] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.197 luup.create_device:: [23] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.198 luup.create_device:: [24] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.200 luup.create_device:: [25] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.201 luup.create_device:: [26] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.202 luup.create_device:: [27] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.203 luup.create_device:: [28] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.204 luup.create_device:: [29] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.205 luup.create_device:: [30] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.206 luup.create_device:: [31] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.208 luup.create_device:: [32] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.209 luup.create_device:: [33] D_DoorLock1.xml / / D_DoorLock1.json
2017-10-03 07:51:18.210 luup.create_device:: [34] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.212 luup.create_device:: [35] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.213 luup.create_device:: [36] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.214 luup.create_device:: [37] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.215 luup.create_device:: [38] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.217 luup.create_device:: [39] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.218 luup.create_device:: [40] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.220 luup.create_device:: [41] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.221 luup.create_device:: [42] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.223 luup.create_device:: [43] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.224 luup.create_device:: [44] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.225 luup.create_device:: [45] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.227 luup.create_device:: [46] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 07:51:18.228 luup.create_device:: [47] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.230 luup.create_device:: [48] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.231 luup.create_device:: [49] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.232 luup.create_device:: [50] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.233 luup.create_device:: [51] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.235 luup.create_device:: [52] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.236 luup.create_device:: [53] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.237 luup.create_device:: [54] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.238 luup.create_device:: [55] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 07:51:18.239 luup.create_device:: [56] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.253 luup.create_device:: [57] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.259 luup.create_device:: [58] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.265 luup.create_device:: [59] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.266 luup.create_device:: [60] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.267 luup.create_device:: [61] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 07:51:18.268 luup.create_device:: [62] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.270 luup.create_device:: [64] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.271 luup.create_device:: [65] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.272 luup.create_device:: [66] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.273 luup.create_device:: [67] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.274 luup.create_device:: [68] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.275 luup.create_device:: [69] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.276 luup.create_device:: [70] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.277 luup.create_device:: [71] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.279 luup.create_device:: [72] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.280 luup.create_device:: [73] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.281 luup.create_device:: [74] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.282 luup.create_device:: [75] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.283 luup.create_device:: [76] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.284 luup.create_device:: [77] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.286 luup.create_device:: [78] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.287 luup.create_device:: [79] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.288 luup.create_device:: [80] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.289 luup.create_device:: [81] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.290 luup.create_device:: [82] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.291 luup.create_device:: [83] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.292 luup.create_device:: [84] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.294 luup.create_device:: [85] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.295 luup.create_device:: [86] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.296 luup.create_device:: [87] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.297 luup.create_device:: [88] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.298 luup.create_device:: [89] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.299 luup.create_device:: [90] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.301 luup.create_device:: [91] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.302 luup.create_device:: [92] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.303 luup.create_device:: [93] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.304 luup.create_device:: [94] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.305 luup.create_device:: [95] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.306 luup.create_device:: [96] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.307 luup.create_device:: [97] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 07:51:18.309 luup.create_device:: [98] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.310 luup.create_device:: [99] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 07:51:18.315 luup.create_device:: [106] D_openWeather.xml / I_openWeather.xml / D_openWeather.json
2017-10-03 07:51:18.317 luup.create_device:: [107] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 07:51:18.318 luup.create_device:: [108] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 07:51:18.324 luup.create_device:: [422] D_SceneController1.xml / / D_SceneController1.json
2017-10-03 07:51:18.325 openLuup.userdata:: loading scenes...
2017-10-03 07:51:18.325 openLuup.userdata:: [1] Landscape [0]
2017-10-03 07:51:18.326 openLuup.userdata:: [2] Wakeup
2017-10-03 07:51:18.326 openLuup.userdata:: [3] Landscape [1]
2017-10-03 07:51:18.326 openLuup.userdata:: number of scenes = 3
2017-10-03 07:51:18.326 openLuup.userdata:: scene#1 'Landscape [0]'
2017-10-03 07:51:18.327 openLuup.userdata:: scene#2 'Wakeup'
2017-10-03 07:51:18.327 openLuup.userdata:: scene#3 'Landscape [1]'
2017-10-03 07:51:18.327 openLuup.userdata:: ...scene loading completed
2017-10-03 07:51:18.327 openLuup.userdata:: loading installed plugin info...
2017-10-03 07:51:18.327 openLuup.userdata:: [openLuup] openLuup (17.3.9)
2017-10-03 07:51:18.327 openLuup.userdata:: [8246] Alternate UI (GitHub.master)
2017-10-03 07:51:18.327 openLuup.userdata:: [AltAppStore] Alternate App Store (16.11.23)
2017-10-03 07:51:18.327 openLuup.userdata:: [VeraBridge] VeraBridge (not.installed)
2017-10-03 07:51:18.328 openLuup.userdata:: [Z-Way] Z-Way (17.10.3)
2017-10-03 07:51:18.328 openLuup.userdata:: [Arduino] MySensors (not.installed)
2017-10-03 07:51:18.328 openLuup.userdata:: [8211] DataYours (not.installed)
2017-10-03 07:51:18.328 openLuup.userdata:: [OW] openWeather (1.6)
2017-10-03 07:51:18.328 openLuup.userdata:: ...user_data loading completed
2017-10-03 07:51:18.328 openLuup.init:: running _openLuup_STARTUP_
2017-10-03 07:51:18.328 luup_log:0: startup code completed
2017-10-03 07:51:18.329 openLuup.init:: init phase completed
2017-10-03 07:51:18.329 :: openLuup LOG ROTATION :: (runtime 0.0 days) In the logs, is the scene controller device id, shown as 422 near the end of the startup log below, incrementing each iteration?
Certainly appears that way. Currently (using previous ZWay file) it stands at 427…
Are you able to remove that device using the smarthome interface and then reload openLuup?
I’ll give it a shot…
Are you able to remove that device using the smarthome interface and then reload openLuup?[/quote]
Otherwise, or as well, here’s another file update.
It will have the same error, but I’m interested in knowing the response from:
http://10.0.4.45:3480/data_request?id=lr_test5Not so successful finding the ZWay device so deletion is out of the question (for now). Going to load the other Zway file…
[quote=“akbooer, post:73, topic:193746”]Otherwise, or as well, here’s another file update.
It will have the same error, but I’m interested in knowing the response from:
http://10.0.4.45:3480/data_request?id=lr_test5
[/quote]
Looping but we have logs…
STARTUP
2017-10-03 16:38:49.491 :: openLuup STARTUP ::
2017-10-03 16:38:49.491 openLuup.init:: version 2016.12.10 @akbooer
2017-10-03 16:38:49.524 openLuup.scheduler:: version 2017.02.22 @akbooer
2017-10-03 16:38:49.526 openLuup.wsapi:: version 2017.01.12 @akbooer
2017-10-03 16:38:49.526 openLuup.server:: version 2017.03.03 @akbooer
2017-10-03 16:38:49.533 openLuup.rooms:: version 2016.06.23 @akbooer
2017-10-03 16:38:49.537 openLuup.scenes:: version 2017.01.15 @akbooer
2017-10-03 16:38:49.541 openLuup.chdev:: version 2016.11.02 @akbooer
2017-10-03 16:38:49.542 openLuup.userdata:: version 2016.11.15 @akbooer
2017-10-03 16:38:49.542 openLuup.requests:: version 2017.02.05 @akbooer
2017-10-03 16:38:49.544 openLuup.io:: version 2016.11.09 @akbooer
2017-10-03 16:38:49.544 openLuup.luup:: version 2016.12.06 @akbooer
2017-10-03 16:38:49.545 luup.create_device:: [1] D_ZWaveNetwork.xml / /
2017-10-03 16:38:49.553 luup.create_device:: [2] D_openLuup.xml / I_openLuup.xml / D_openLuup.json
2017-10-03 16:38:49.554 openLuup.init:: loading configuration user_data.json
2017-10-03 16:38:49.557 openLuup.userdata:: loading user_data json...
2017-10-03 16:38:49.768 openLuup.userdata:: loading rooms...
2017-10-03 16:38:49.768 openLuup.userdata:: ...room loading completed
2017-10-03 16:38:49.768 openLuup.userdata:: loading devices...
2017-10-03 16:38:49.768 luup.create_device:: [1] D_ZWaveNetwork.xml / /
2017-10-03 16:38:49.841 luup.create_device:: [3] D_ALTUI.xml / I_ALTUI.xml / D_ALTUI_UI7.json
2017-10-03 16:38:49.848 luup.create_device:: [4] D_AltAppStore.xml / I_AltAppStore.xml / D_AltAppStore.json
2017-10-03 16:38:49.871 luup.create_device:: [5] D_ZWay.xml / I_ZWay.xml / D_ZWay.json
2017-10-03 16:38:49.934 luup.create_device:: [6] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:49.945 luup.create_device:: [7] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:49.948 luup.create_device:: [8] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:49.961 luup.create_device:: [9] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:49.985 luup.create_device:: [10] D_DoorLock1.xml / / D_DoorLock1.json
2017-10-03 16:38:49.987 luup.create_device:: [11] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:49.991 luup.create_device:: [12] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:49.994 luup.create_device:: [13] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:49.998 luup.create_device:: [14] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:49.999 luup.create_device:: [15] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.001 luup.create_device:: [16] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.002 luup.create_device:: [18] D_DoorLock1.xml / / D_DoorLock1.json
2017-10-03 16:38:50.003 luup.create_device:: [19] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.005 luup.create_device:: [20] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.006 luup.create_device:: [21] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.008 luup.create_device:: [22] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.009 luup.create_device:: [23] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.011 luup.create_device:: [24] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.012 luup.create_device:: [25] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.013 luup.create_device:: [26] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.015 luup.create_device:: [27] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.018 luup.create_device:: [28] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.019 luup.create_device:: [29] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.020 luup.create_device:: [30] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.021 luup.create_device:: [31] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.022 luup.create_device:: [32] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.024 luup.create_device:: [33] D_DoorLock1.xml / / D_DoorLock1.json
2017-10-03 16:38:50.025 luup.create_device:: [34] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.026 luup.create_device:: [35] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.028 luup.create_device:: [36] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.029 luup.create_device:: [37] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.030 luup.create_device:: [38] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.031 luup.create_device:: [39] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.033 luup.create_device:: [40] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.035 luup.create_device:: [41] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.036 luup.create_device:: [42] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.038 luup.create_device:: [43] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.039 luup.create_device:: [44] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.040 luup.create_device:: [45] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.041 luup.create_device:: [46] D_DimmableLight1.xml / / D_DimmableLight1.json
2017-10-03 16:38:50.043 luup.create_device:: [47] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.044 luup.create_device:: [48] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.045 luup.create_device:: [49] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.046 luup.create_device:: [50] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.048 luup.create_device:: [51] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.049 luup.create_device:: [52] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.050 luup.create_device:: [53] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.051 luup.create_device:: [54] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.052 luup.create_device:: [55] D_ComboDevice1.xml / / D_ComboDevice1.json
2017-10-03 16:38:50.053 luup.create_device:: [56] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.067 luup.create_device:: [57] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.073 luup.create_device:: [58] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.079 luup.create_device:: [59] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.080 luup.create_device:: [60] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.081 luup.create_device:: [61] D_BinaryLight1.xml / / D_BinaryLight1.json
2017-10-03 16:38:50.083 luup.create_device:: [62] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.084 luup.create_device:: [64] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.085 luup.create_device:: [65] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.086 luup.create_device:: [66] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.087 luup.create_device:: [67] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.088 luup.create_device:: [68] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.089 luup.create_device:: [69] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.090 luup.create_device:: [70] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.092 luup.create_device:: [71] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.093 luup.create_device:: [72] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.094 luup.create_device:: [73] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.095 luup.create_device:: [74] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.096 luup.create_device:: [75] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.097 luup.create_device:: [76] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.098 luup.create_device:: [77] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.100 luup.create_device:: [78] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.101 luup.create_device:: [79] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.102 luup.create_device:: [80] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.103 luup.create_device:: [81] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.104 luup.create_device:: [82] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.105 luup.create_device:: [83] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.106 luup.create_device:: [84] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.108 luup.create_device:: [85] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.109 luup.create_device:: [86] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.110 luup.create_device:: [87] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.111 luup.create_device:: [88] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.112 luup.create_device:: [89] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.113 luup.create_device:: [90] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.114 luup.create_device:: [91] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.115 luup.create_device:: [92] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.117 luup.create_device:: [93] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.118 luup.create_device:: [94] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.119 luup.create_device:: [95] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.120 luup.create_device:: [96] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.121 luup.create_device:: [97] D_MotionSensor1.xml / / D_MotionSensor1.json
2017-10-03 16:38:50.123 luup.create_device:: [98] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.124 luup.create_device:: [99] D_LightSensor1.xml / / D_LightSensor1.json
2017-10-03 16:38:50.129 luup.create_device:: [106] D_openWeather.xml / I_openWeather.xml / D_openWeather.json
2017-10-03 16:38:50.131 luup.create_device:: [107] D_TemperatureSensor1.xml / / D_TemperatureSensor1.json
2017-10-03 16:38:50.132 luup.create_device:: [108] D_HumiditySensor1.xml / / D_HumiditySensor1.json
2017-10-03 16:38:50.138 luup.create_device:: [461] D_SceneController1.xml / / D_SceneController1.json
2017-10-03 16:38:50.138 openLuup.userdata:: loading scenes...
2017-10-03 16:38:50.139 openLuup.userdata:: [1] Landscape [0]
2017-10-03 16:38:50.140 openLuup.userdata:: [2] Wakeup
2017-10-03 16:38:50.140 openLuup.userdata:: [3] Landscape [1]
2017-10-03 16:38:50.140 openLuup.userdata:: number of scenes = 3
2017-10-03 16:38:50.140 openLuup.userdata:: scene#1 'Landscape [0]'
2017-10-03 16:38:50.140 openLuup.userdata:: scene#2 'Wakeup'
2017-10-03 16:38:50.140 openLuup.userdata:: scene#3 'Landscape [1]'
2017-10-03 16:38:50.140 openLuup.userdata:: ...scene loading completed
2017-10-03 16:38:50.140 openLuup.userdata:: loading installed plugin info...
2017-10-03 16:38:50.141 openLuup.userdata:: [openLuup] openLuup (17.3.9)
2017-10-03 16:38:50.141 openLuup.userdata:: [8246] Alternate UI (GitHub.master)
2017-10-03 16:38:50.141 openLuup.userdata:: [AltAppStore] Alternate App Store (16.11.23)
2017-10-03 16:38:50.141 openLuup.userdata:: [VeraBridge] VeraBridge (not.installed)
2017-10-03 16:38:50.141 openLuup.userdata:: [Z-Way] Z-Way (17.10.3b)
2017-10-03 16:38:50.141 openLuup.userdata:: [Arduino] MySensors (not.installed)
2017-10-03 16:38:50.141 openLuup.userdata:: [8211] DataYours (not.installed)
2017-10-03 16:38:50.141 openLuup.userdata:: [OW] openWeather (1.6)
2017-10-03 16:38:50.142 openLuup.userdata:: ...user_data loading completed
2017-10-03 16:38:50.142 openLuup.init:: running _openLuup_STARTUP_
2017-10-03 16:38:50.142 luup_log:0: startup code completed
2017-10-03 16:38:50.142 openLuup.init:: init phase completed
2017-10-03 16:38:50.142 :: openLuup LOG ROTATION :: (runtime 0.0 days)
Part 2 coming…
[quote=“CudaNet, post:74, topic:193746”]Not so successful finding the ZWay device so deletion is out of the question (for now). Going to load the other Zway file…
[quote=“akbooer, post:73, topic:193746”]Otherwise, or as well, here’s another file update.
It will have the same error, but I’m interested in knowing the response from:
http://10.0.4.45:3480/data_request?id=lr_test5
[/quote][/quote]
Part 2:
LuaUPnP
2017-10-03 16:38:48.041 :: openLuup LOG ROTATION :: (runtime 0.0 days)
2017-10-03 16:38:48.042 openLuup.init:: init phase completed
2017-10-03 16:38:48.042 openLuup.server:: starting HTTP server on 10.0.4.45:3480 tcp{server}: 0x1096520
2017-10-03 16:38:48.042 openLuup.scheduler:: starting
2017-10-03 16:38:48.042 openLuup.scheduler:: [2] openLuup device startup
2017-10-03 16:38:48.042 luup_log:2: synch in 72.0 s
2017-10-03 16:38:48.043 luup.variable_set:2: 2.urn:upnp-org:serviceId:altui1.DisplayLine2 was: EMPTY now: #hooks:0
2017-10-03 16:38:48.043 luup.variable_set:2: 2.openLuup.Version was: EMPTY now: v17.3.9 #hooks:0
2017-10-03 16:38:48.043 luup_log:2: v17.3.9
2017-10-03 16:38:48.043 luup.chdev.append:: [AltAppStore] Alternate App Store
2017-10-03 16:38:48.043 luup.chdev.sync:: [2] openLuup, syncing children
2017-10-03 16:38:48.043 luup.variable_set:2: 2.openLuup.Memory_Mb was: EMPTY now: 4 #hooks:0
2017-10-03 16:38:48.044 luup.variable_set:2: 2.openLuup.CpuLoad was: EMPTY now: 0.5 #hooks:0
2017-10-03 16:38:48.044 luup.variable_set:2: 2.openLuup.Uptime_Days was: EMPTY now: 0 #hooks:0
2017-10-03 16:38:48.044 luup.variable_set:2: 2.urn:upnp-org:serviceId:altui1.DisplayLine1 was: EMPTY now: 4 Mb, cpu 0.5%, 0 days #hooks:0
2017-10-03 16:38:48.044 luup_log:2: 4 Mb, cpu 0.5%, 0 days
2017-10-03 16:38:48.045 luup.variable_set:2: 2.openLuup.MemFree_Mb was: EMPTY now: 719.7 #hooks:0
2017-10-03 16:38:48.045 luup.variable_set:2: 2.openLuup.MemAvail_Mb was: EMPTY now: 811 #hooks:0
2017-10-03 16:38:48.045 luup.variable_set:2: 2.openLuup.MemTotal_Mb was: EMPTY now: 947.7 #hooks:0
2017-10-03 16:38:48.045 openLuup.scheduler:: [2] openLuup device startup completed: status=true, msg=synch in 72.0 s, name=L_openLuup
2017-10-03 16:38:48.045 openLuup.scheduler:: [3] Alternate UI device startup
2017-10-03 16:38:48.045 luup_log:3: ALTUI: initstatus(3) starting version: v1.92
2017-10-03 16:38:48.046 openLuup.scheduler:: [3] Alternate UI device startup completed: status=nil, msg=nil, name=nil
2017-10-03 16:38:48.046 openLuup.scheduler:: [4] Alternate App Store device startup
2017-10-03 16:38:48.046 luup_log:4: AltAppStore : starting...
2017-10-03 16:38:48.046 luup.variable_set:4: 4.urn:upnp-org:serviceId:altui1.DisplayLine1 was: AltAppStore now: AltAppStore #hooks:0
2017-10-03 16:38:48.046 luup.variable_set:4: 4.urn:upnp-org:serviceId:altui1.DisplayLine2 was: now: #hooks:0
2017-10-03 16:38:48.046 luup_log:4: AltAppStore : v16.11.23
2017-10-03 16:38:48.046 luup.set_failure:4: status = 0
2017-10-03 16:38:48.046 luup.variable_set:4: 4.urn:micasaverde-com:serviceId:HaDevice1.CommFailure was: 0 now: 0 #hooks:0
2017-10-03 16:38:48.046 luup.variable_set:4: 4.urn:micasaverde-com:serviceId:HaDevice1.CommFailureTime was: 0 now: 0 #hooks:0
2017-10-03 16:38:48.047 openLuup.scheduler:: [4] Alternate App Store device startup completed: status=true, msg=OK, name=AltAppStore
2017-10-03 16:38:48.047 openLuup.scheduler:: [5] Z-Way device startup
2017-10-03 16:38:48.047 luup_log:5: ZWay: v17.10.3
2017-10-03 16:38:48.077 luup.variable_set:5: 5.urn:upnp-org:serviceId:altui1.DisplayLine1 was: 168 vDevs, 50 nodes now: #hooks:0
2017-10-03 16:38:48.077 luup.set_failure:5: status = 0
2017-10-03 16:38:48.077 luup.variable_set:5: 5.urn:micasaverde-com:serviceId:HaDevice1.CommFailure was: 0 now: 0 #hooks:0
2017-10-03 16:38:48.077 luup.variable_set:5: 5.urn:micasaverde-com:serviceId:HaDevice1.CommFailureTime was: 0 now: 0 #hooks:0
2017-10-03 16:38:48.077 luup.register_handler:5: global_function_name=HTTP_Z-Way_5, request=z5
2017-10-03 16:38:48.242 luup.register_handler:5: global_function_name=HTTP_Z-Way_TEST_5, request=test5
2017-10-03 16:38:48.301 luup.chdev.append:: [71-0-38] 71: Leviton Dimmable
2017-10-03 16:38:48.308 luup.chdev.append:: [43-0-37] 43: Den Binary
2017-10-03 16:38:48.312 luup.chdev.append:: [51] 51: Master Combo
2017-10-03 16:38:48.317 luup.chdev.append:: [75-0-48-1] 75: Fibaro Motion
2017-10-03 16:38:48.331 luup.chdev.append:: [47-0-98] 47: Back Door
2017-10-03 16:38:48.338 luup.chdev.append:: [55-0-37] 55: Guest Binary
2017-10-03 16:38:48.345 luup.chdev.append:: [45-0-37] 45: Arbor Binary
2017-10-03 16:38:48.352 luup.chdev.append:: [57-0-37] 57: Guest Binary
2017-10-03 16:38:48.359 luup.chdev.append:: [39-0-37] 39: Attic Binary
2017-10-03 16:38:48.363 luup.chdev.append:: [29] 29: Outdoor Combo
2017-10-03 16:38:48.370 luup.chdev.append:: [69-0-37] 69: Switch Binary
2017-10-03 16:38:48.374 luup.chdev.append:: [?] 0: 0 Controller
2017-10-03 16:38:48.375 luup.create_device:: [461] D_SceneController1.xml / / D_SceneController1.json
2017-10-03 16:38:48.390 luup.chdev.append:: [3-0-98] 3: Front Door
2017-10-03 16:38:48.398 luup.chdev.append:: [2-0-37] 2: Zooz Binary
2017-10-03 16:38:48.450 luup.chdev.append:: [5-0-38] 5: Lounge Dimmable
2017-10-03 16:38:48.501 luup.chdev.append:: [4-0-38] 4: Office Dimmable
2017-10-03 16:38:48.553 luup.chdev.append:: [7-0-38] 7: Front Dimmable
2017-10-03 16:38:48.559 luup.chdev.append:: [9-0-48-1] 9: Storm Motion
2017-10-03 16:38:48.567 luup.chdev.append:: [8-0-37] 8: Porch Binary
2017-10-03 16:38:48.574 luup.chdev.append:: [27-0-37] 27: Hallway Binary
2017-10-03 16:38:48.582 luup.chdev.append:: [31-0-37] 31: Security Binary
2017-10-03 16:38:48.588 luup.chdev.append:: [33-0-48-1] 33: Wiring Motion
2017-10-03 16:38:48.592 luup.chdev.append:: [23] 23: Foyer Combo
2017-10-03 16:38:48.600 luup.chdev.append:: [42-0-37] 42: Den Binary
2017-10-03 16:38:48.605 luup.chdev.append:: [52] 52: Den Combo
2017-10-03 16:38:48.612 luup.chdev.append:: [62] 62: Media Combo
2017-10-03 16:38:48.685 luup.chdev.append:: [72-0-38] 72: Leviton Dimmable
2017-10-03 16:38:48.700 luup.chdev.append:: [54-0-98] 54: Wiring Door
2017-10-03 16:38:48.707 luup.chdev.append:: [46-0-37] 46: Garage Binary
2017-10-03 16:38:48.715 luup.chdev.append:: [56-0-37] 56: Guest Binary
2017-10-03 16:38:48.722 luup.chdev.append:: [44-0-37] 44: Den Binary
2017-10-03 16:38:48.725 luup.chdev.append:: [58] 58: Guest Combo
2017-10-03 16:38:48.732 luup.chdev.append:: [28-0-37] 28: Abby Binary
2017-10-03 16:38:48.740 luup.chdev.append:: [38-0-37] 38: Lounge Binary
2017-10-03 16:38:48.790 luup.chdev.append:: [77-0-38] 77: Aeotec Dimmable
2017-10-03 16:38:48.841 luup.chdev.append:: [76-0-38] 76: Aeotec Dimmable
2017-10-03 16:38:48.848 luup.chdev.append:: [74-0-37] 74: Switch Binary
2017-10-03 16:38:48.898 luup.chdev.append:: [73-0-38] 73: Leviton Dimmable
2017-10-03 16:38:48.905 luup.chdev.append:: [67-0-37] 67: Switch Binary
2017-10-03 16:38:48.909 luup.chdev.append:: [63] 63: Garage Combo
2017-10-03 16:38:48.959 luup.chdev.append:: [61-0-38] 61: Guest Dimmable
2017-10-03 16:38:48.966 luup.chdev.append:: [60-0-37] 60: Pergola Binary
2017-10-03 16:38:48.973 luup.chdev.append:: [50-0-37] 50: Master Binary
2017-10-03 16:38:48.977 luup.chdev.append:: [24] 24: Hallway Combo
2017-10-03 16:38:48.984 luup.chdev.append:: [41-0-37] 41: Abby Binary
2017-10-03 16:38:48.991 luup.chdev.append:: [26-0-37] 26: Indoor Binary
2017-10-03 16:38:48.997 luup.chdev.append:: [25-0-37] 25: Hallway Binary
2017-10-03 16:38:49.004 luup.chdev.append:: [30-0-37] 30: Switch Binary
2017-10-03 16:38:49.008 luup.chdev.append:: [22] 22: Attic Combo
2017-10-03 16:38:49.011 luup.chdev.append:: [32] 32: Wiring Combo
2017-10-03 16:38:49.012 luup.chdev.sync:: [5] Z-Way, syncing children
2017-10-03 16:38:49.012 openLuup.chdev:: deleting [460] 0: 0 Controller
2017-10-03 16:38:49.012 luup.variable_set:5: 5.urn:upnp-org:serviceId:altui1.DisplayLine1 was: now: 168 vDevs, 50 nodes #hooks:0
2017-10-03 16:38:49.012 luup.chdev.sync:: [6] 71: Leviton Dimmable, syncing children
2017-10-03 16:38:49.012 luup.chdev.sync:: [7] 43: Den Binary, syncing children
2017-10-03 16:38:49.017 luup.chdev.append:: [51-0-48-1] 51: Master Motion
2017-10-03 16:38:49.029 luup.chdev.append:: [51-0-49-1] 51: Master Temperature
2017-10-03 16:38:49.034 luup.chdev.append:: [51-0-49-3] 51: Master Light
2017-10-03 16:38:49.038 luup.chdev.append:: [51-0-49-5] 51: Master Humidity
2017-10-03 16:38:49.042 luup.chdev.append:: [51-0-49-27] 51: Master UVSensor
2017-10-03 16:38:49.042 luup.chdev.sync:: [8] 51: Master Combo, syncing children
2017-10-03 16:38:49.042 luup.chdev.sync:: [9] 75: Fibaro Motion, syncing children
2017-10-03 16:38:49.042 luup.chdev.sync:: [10] 47: Back Door, syncing children
2017-10-03 16:38:49.043 luup.chdev.sync:: [11] 55: Guest Binary, syncing children
2017-10-03 16:38:49.043 luup.chdev.sync:: [12] 45: Arbor Binary, syncing children
2017-10-03 16:38:49.043 luup.chdev.sync:: [13] 57: Guest Binary, syncing children
2017-10-03 16:38:49.043 luup.chdev.sync:: [14] 39: Attic Binary, syncing children
2017-10-03 16:38:49.050 luup.chdev.append:: [29-0-37] 29: Outdoor Binary
2017-10-03 16:38:49.055 luup.chdev.append:: [29-0-48-1] 29: Fortrezz Motion
2017-10-03 16:38:49.055 luup.chdev.sync:: [15] 29: Outdoor Combo, syncing children
2017-10-03 16:38:49.055 luup.chdev.sync:: [16] 69: Landscape [W], syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [18] 3: Front Door, syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [19] 2: Zooz Binary, syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [20] 5: Lounge Dimmable, syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [21] 4: Office Dimmable, syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [22] 7: Landscape [S], syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [23] 9: Storm Motion, syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [24] 8: Porch Binary, syncing children
2017-10-03 16:38:49.056 luup.chdev.sync:: [25] 27: Hallway Binary, syncing children
2017-10-03 16:38:49.057 luup.chdev.sync:: [26] 31: Security Binary, syncing children
2017-10-03 16:38:49.057 luup.chdev.sync:: [27] 33: Wiring Motion, syncing children
2017-10-03 16:38:49.063 luup.chdev.append:: [23-0-48-1] 23: Foyer Motion
2017-10-03 16:38:49.075 luup.chdev.append:: [23-0-49-1] 23: Foyer Temperature
2017-10-03 16:38:49.080 luup.chdev.append:: [23-0-49-3] 23: Foyer Light
2017-10-03 16:38:49.085 luup.chdev.append:: [23-0-49-5] 23: Foyer Humidity
2017-10-03 16:38:49.089 luup.chdev.append:: [23-0-49-27] 23: Foyer UVSensor
2017-10-03 16:38:49.090 luup.chdev.sync:: [28] 23: Foyer Combo, syncing children
2017-10-03 16:38:49.090 luup.chdev.sync:: [29] 42: Den Binary, syncing children
2017-10-03 16:38:49.095 luup.chdev.append:: [52-0-48-1] 52: Den Motion
2017-10-03 16:38:49.108 luup.chdev.append:: [52-0-49-1] 52: Den Temperature
2017-10-03 16:38:49.113 luup.chdev.append:: [52-0-49-3] 52: Den Light
2017-10-03 16:38:49.117 luup.chdev.append:: [52-0-49-5] 52: Den Humidity
2017-10-03 16:38:49.128 luup.chdev.append:: [52-0-49-27] 52: Den UVSensor
2017-10-03 16:38:49.128 luup.chdev.sync:: [30] 52: Den Combo, syncing children
2017-10-03 16:38:49.134 luup.chdev.append:: [62-0-48-1] 62: Media Motion
2017-10-03 16:38:49.146 luup.chdev.append:: [62-0-49-1] 62: Media Temperature
2017-10-03 16:38:49.151 luup.chdev.append:: [62-0-49-5] 62: Media Humidity
2017-10-03 16:38:49.156 luup.chdev.append:: [62-0-49-3] 62: Media Light
2017-10-03 16:38:49.160 luup.chdev.append:: [62-0-49-27] 62: Media UVSensor
2017-10-03 16:38:49.161 luup.chdev.sync:: [31] 62: Media Combo, syncing children
2017-10-03 16:38:49.161 luup.chdev.sync:: [32] 72: Leviton Dimmable, syncing children
2017-10-03 16:38:49.161 luup.chdev.sync:: [33] 54: Wiring Door, syncing children
2017-10-03 16:38:49.161 luup.chdev.sync:: [34] 46: Garage Binary, syncing children
2017-10-03 16:38:49.161 luup.chdev.sync:: [35] 56: Guest Binary, syncing children
2017-10-03 16:38:49.161 luup.chdev.sync:: [36] 44: Den Binary, syncing children
2017-10-03 16:38:49.167 luup.chdev.append:: [58-0-48-1] 58: Guest Motion
2017-10-03 16:38:49.180 luup.chdev.append:: [58-0-49-1] 58: Guest Temperature
2017-10-03 16:38:49.185 luup.chdev.append:: [58-0-49-3] 58: Guest Light
2017-10-03 16:38:49.189 luup.chdev.append:: [58-0-49-5] 58: Guest Humidity
2017-10-03 16:38:49.196 luup.chdev.append:: [58-0-49-27] 58: Guest UVSensor
2017-10-03 16:38:49.196 luup.chdev.sync:: [37] 58: Guest Combo, syncing children
2017-10-03 16:38:49.196 luup.chdev.sync:: [38] 28: Abby Binary, syncing children
2017-10-03 16:38:49.196 luup.chdev.sync:: [39] 38: Lounge Binary, syncing children
2017-10-03 16:38:49.196 luup.chdev.sync:: [40] 77: Aeotec Dimmable, syncing children
2017-10-03 16:38:49.197 luup.chdev.sync:: [41] 76: Aeotec Dimmable, syncing children
2017-10-03 16:38:49.197 luup.chdev.sync:: [42] 74: Landscape [N], syncing children
2017-10-03 16:38:49.197 luup.chdev.sync:: [43] 73: Leviton Dimmable, syncing children
2017-10-03 16:38:49.197 luup.chdev.sync:: [44] 67: Switch Binary, syncing children
2017-10-03 16:38:49.208 luup.chdev.append:: [63-0-48-1] 63: Garage Motion
2017-10-03 16:38:49.231 luup.chdev.append:: [63-0-49-1] 63: Garage Temperature
2017-10-03 16:38:49.243 luup.chdev.append:: [63-0-49-3] 63: Garage Light
2017-10-03 16:38:49.250 luup.chdev.append:: [63-0-49-5] 63: Garage Humidity
2017-10-03 16:38:49.255 luup.chdev.append:: [63-0-49-27] 63: Garage UVSensor
2017-10-03 16:38:49.255 luup.chdev.sync:: [45] 63: Garage Combo, syncing children
2017-10-03 16:38:49.255 luup.chdev.sync:: [46] 61: Guest Dimmable, syncing children
2017-10-03 16:38:49.255 luup.chdev.sync:: [47] 60: Pergola Binary, syncing children
2017-10-03 16:38:49.255 luup.chdev.sync:: [48] 50: Master Binary, syncing children
2017-10-03 16:38:49.261 luup.chdev.append:: [24-0-48-1] 24: Hallway Motion
2017-10-03 16:38:49.273 luup.chdev.append:: [24-0-49-1] 24: Hallway Temperature
2017-10-03 16:38:49.278 luup.chdev.append:: [24-0-49-3] 24: Hallway Light
2017-10-03 16:38:49.282 luup.chdev.append:: [24-0-49-5] 24: Hallway Humidity
2017-10-03 16:38:49.286 luup.chdev.append:: [24-0-49-27] 24: Hallway UVSensor
2017-10-03 16:38:49.286 luup.chdev.sync:: [49] 24: Hallway Combo, syncing children
2017-10-03 16:38:49.287 luup.chdev.sync:: [50] 41: Abby Binary, syncing children
2017-10-03 16:38:49.287 luup.chdev.sync:: [51] 26: Indoor Binary, syncing children
2017-10-03 16:38:49.287 luup.chdev.sync:: [52] 25: Hallway Binary, syncing children
2017-10-03 16:38:49.287 luup.chdev.sync:: [53] 30: Switch Binary, syncing children
2017-10-03 16:38:49.292 luup.chdev.append:: [22-0-48-1] 22: Attic Motion
2017-10-03 16:38:49.304 luup.chdev.append:: [22-0-49-1] 22: Attic Temperature
2017-10-03 16:38:49.309 luup.chdev.append:: [22-0-49-3] 22: Attic Light
2017-10-03 16:38:49.309 luup.chdev.sync:: [54] 22: Attic Combo, syncing children
2017-10-03 16:38:49.315 luup.chdev.append:: [32-0-48-1] 32: Wiring Motion
2017-10-03 16:38:49.327 luup.chdev.append:: [32-0-49-1] 32: Wiring Temperature
2017-10-03 16:38:49.331 luup.chdev.append:: [32-0-49-3] 32: Wiring Light
2017-10-03 16:38:49.331 luup.chdev.sync:: [55] 32: Wiring Combo, syncing children
2017-10-03 16:38:49.331 luup.chdev.sync:: [461] 0: 0 Controller, syncing children
2017-10-03 16:38:49.332 openLuup.luup:5: device 5 'Z-Way' requesting reload
2017-10-03 16:38:49.332 luup.reload:5: saving user_data
2017-10-03 16:38:49.470 openLuup.luup:5: exiting with code 42 - after 0.0 hours
Sorry, that’s my fault.
I’ve removed the previous ‘fix’ which led to looping, so now the original error should still crash the plugin, but I need to see that response from the new HTTP request, which should still work…
No problem, loading now…
[quote=“akbooer, post:77, topic:193746”]Sorry, that’s my fault.
I’ve removed the previous ‘fix’ which led to looping, so now the original error should still crash the plugin, but I need to see that response from the new HTTP request, which should still work…[/quote]
Sorry, had to load these to files…
…but no response from the HTTP request?
Best Home Automation shopping experience. Shop at Ezlo!
© 2024 Ezlo Innovation, All Rights Reserved. Terms of Use | Privacy Policy | Forum Rules