Most of them works great (everything tested in EU version, most devices from my list are in everyday use, but some tests have not been very long till now).
door/window sensor:
Sensative Strips Guard (model Strips Ma-Zw)
works good
Schweiger ZHS09 Door/Window Sensor (probably branded Vision ZD2102)
works good, I can reccomend it for use with 2,3,4-leaf window (supports external passive sensors)
Zipato vs-zd2102.eu (probably branded Vision ZD2102)
works good, I can reccomend it for use with 2,3,4-leaf window (supports external passive sensors)
Fibaro FGK-10x (it means models from FGK-101 to FGK-107 - they differ only by casing colors)
works good, can be used also with external temperature sensor DS18B20 (or as 1-in binary sensor but it canāt be used as dooor/window sensor in this config)
Aeotec ZW112 Door/Window Sensor 6 *
works good
door sensor:
Aeotec ZW089 Recessed Door Sensor Gen5*
works good, but hard to mount (fitting only specific door frame)
smart plug on/off:
NEO Coolcam NAS-WR01Z Power plug
works good
Aeotec ZW096 Smart Switch 6 *
works great
Fibaro FGWPE/F-102 ZW5
works great
smart plug dimmer:
Aeotec ZW099 Smart Dimmer 6 *
works great, but the only device I had, was selfdamaged after only half a year of use
LED RGBW bulbs:
Aeotec ZW098 LED Bulb Gen5 *
works good, but I do NOT reccomend this, because of an unpleasant shade of white light
LED white bulbs (on/off/dim):
Domitech ZE27EU *
works great, best shade of warm white (2700K)
multisensors:
Vision ZP3102eu-5 Security PIR Motion Sensor Gen5 (PIR+temp) *
works good, but temp is inaccurate (Ā±2 degrees C)
Aeon Labs ZW100 MultiSensor 6 (PIR+temp+humidity+light+UV+tamper) *
works great
Aeon Labs ZW074 MultiSensor Gen5 (PIR+temp+humidity+light) *
works good, but I do NOT reccomend this, this is obsolete product (powered by AAA batteries and drains them quick!)
remote controllers:
Nodon CRC-3-1-0x Octan Remote 4-key
works good
Nodon CRC-3-6-0x remote 4-key
works good
Nodon CWS-3-1-0x wall switch (remote) 4-key
works good
x - at Nodon means color of casing, 1=white
siren:
Popp POPE005107 External solar siren
works good, but needs to be exposed to Sun one day before installation or some days if they are cloudy (and has errors in manual, but real life installation is easier then described)
smoke sensor:
Popp POPE004001 Smoke sensor with siren
works good
water leak sensor:
Everspring ST812 Flood Sensor
works good, but I do NOT reccomend this, this is obsolete product (powered by AA cells)
RFID:
Zipato wt-rfid.eu Mini RFiD Keypad
works good, but I do NOT reccomend this, because of VERY high battery drain (and powered by AA batteries)
to be continuedā¦ (I will add much more devices to this list, when I will have more time)
I havenāt check compatibility list a long time, soā¦
[hr]
There are some of devices which should be supported (in spite of I/others would or wouldnān reccomend them because of other reasons), so there should be second list of devices, where Vera support could reply: āthis device will not be supportedā=ādonāt buy itā or āwe have this device in our future support plansā
short list of devices NOT working/working partially (some of them just need working template) - this list may not be actual (Iām copying this from my notes)
- D-Link DCH-Z510
- NEO Coolcam NAS-PD01Z PIR/light sensor
- NEO Coolcam NAS-PD02Z PIR/light sensor
- NEO Coolcam NAS-DS01Z door/window sensor
- NEO Coolcam NAS-WS01Z Water Sensor
- Fibaro Swipe
- Danfoss LC-13
- Eurotronic Comet Z
- Popp POPE005206 Z-weather (this is probably the only weather station with z-wave?)
- Popp POPE700168 pluviometer (as above)
- Zipato BULB2 (model: rgb2) this could be great - best shade of warm white (2700K), but out of the box works only as āon/off/dimā
[hr]
And last thougt: about non-z-wave devices - last (december 2017) situation with plugins supporting ie. TP-Link, Yeelight or Broadlink devices shows me that I can NOT rely on external plugins?
Iāve bought some of that devices when I saw working plugins, but now Iām alone with working stuff which could not be integrated with Vera (Iām not programmerā¦)