Plugin update version 1.94

1.94 release notes
Changes and additions vs version 1.87
Add handling of these devices:

Novy extractor hood

Blinds

  • ASP
  • Dolat DLM-1, Topstar
  • Hualite
  • Motostar
  • Screenline
  • Sunpery/BTX

Lighting

  • HQ Lighting
  • Oase InScenio
  • IT (FA500, PROmax, …)
  • Lighting4 protocol switches (see below)

Sensors

  • Davis rain sensor
  • Inovally plant humidity
  • RM17xRF smoke sensors

Thanks to a suggestion by reneboer in the forum, added code to make the slider for window cover devices (blinds/awnings) fairly functional. To make use of the slider:

  • Window cover devices should now have a new variable MaxMoveTime. The value of this variable defaults to 10 seconds. It should be set to the time it takes for the blind/shade/awning to go from completely closed to completely open. Once that is set, moving the slider will hopefully command the blind to travel from its current position to the desired position (percentage of full travel) based on the percentage of the full travel time. It won’t be precise but should be a good approximation. I don’t have any motorized window covers with which to test this functionality properly. I hope that the users can provide feedback.

There are now additional Somfy/RTS devices. The idea is to have controls in the UI appropriate for different types of devices: US Venetian blinds, European Venetian blinds, Somfy and ASA awnings.

The plugin can now control light switches using the Lighting4 protocol. I believe there are a number of these available on Amazon. I’ve purchased two different brands of these switches (Denwenwils HRS101B and BN-LINK ES1513U-1) and can confirm that they work well and are pretty inexpensive.
To add devices like this follow these steps:

  1. In the Protocol setting tab of the RFXtrx enable only the Lighting4 protocol. You don’t need to save this protocol setup permanently.
  2. In the New device tab select the Lighting4 category, give it a name, and click Create.
  3. Once the new device appears in the devices page of the Vera, using the remote that came with the switch, click the On button
  4. Then click the Off button
  5. Now you should be able to go to the Advanced tab of the new device, click the Variables tab. You should see the correct values for the OnCode, OffCode and SigPeriod variables. The default values for these variables are G, G, and 100. These are not valid values for the OnCode and Offcode and should now have been changed to the correct values. If they’ve been updated you should now be able to control the switch with the remote OR with the Vera UI for the device.

All of the plugin files are included in the attached ZIP file. The files that are new or have changed are:

L_RFXtrx.lua
J_RFXtrx.js
I_RFXtrx.xml
D_RFXtrx.json
D_RainSensor1.json
D_WindowCovering2.json
D_WindowCovering3.json
D_WindowCovering4.json
D_Fan0.json
D_Fan1.json
D_Fan2.json
D_Fan5.json
D_Fan7.json
D_Fan8.json
D_Fan9.json
D_Fan11.json
D_Fan12.json

Once you’ve unzipped the ZIP file, the files you need can be uploaded using the Vera → Apps → Develop apps → Luup files → upload. Keep in mind that icon files (.png) cannot be uploaded this way. The easiest way to upload them is to use WinSCP to upload them to /www/cmh/skins/default/icons/

RFXtrxPlugIn1.94.zip (143.4 KB)

3 Likes

Good Morning Tinman,

first of all thanks for your ongoing and great work with the RFXtrx plugin.
I was just setting up a new controller (Veraplus) as a Test System, did a factory reset and upgraded to 7.31 and created a RFXtrx Device using the 1.94 Files. On the RFXtrx433XL is 1041. By clicking on the protocol settings I am getting the following error.

Error executing function RFX_showProtocols(): undefined is not an object (evaluating ‘firmwareType.substr’)

I am sure you have an idea what goes wrong. I have a production system on 7.31 with 1.87 and 1041 which runs without problems, so it could be in a 1.94 file.
In the meanwhile I will upgrade the RFXtrx433XL to 1042.

regards and thanks for help

Michael

I had installed beta 3 a few years ago because I want to use this with RFXCom. I had 4 somfy blind motors connected to the plug-in (category : RFY; unit code 1). It works great. Now I want to connect another blind motor to Vera, but I can’t do that. I have made a new device and click on create button and it says “Vera Will reload to validate the changes…” but nothing happens.

ad device

You post an update (version 1.94) on the Vera community. When downloading the files and uploaded in Vera. The 4 somfy blinds do not work with the new version.

Maybe you can help to fix the problem. I want to use the exisiting 4 somfy blinds and I want to connect antoher somfy blindmotor.

I live in the Netherland (europe)

Hi Tinman,

that error message looks like a random thing or that the Vera Plus is busy for a while. After going for a cup of coffee the error is gone, but are you sure that is version 1.94? I see the files with a creation date in 2020 but when I go to RFXtrx device/help I stil see 1.87.

I downloaded the zip and dropped the files Apps/develop Apps/Luupfiles upload. I even restarted the vera plus, but it still says 1.87.

Bildschirmfoto 2020-02-24 um 15.47.53

Do you have a hint for us how did you overcome that write protection??? I use the user root and PWD from the bottom of my Veraplus.

scp: /www/cmh/skins/default/img/icons/RFXtrx433E.png: Read-only file system

regards
Michael

In my case I can summarize, that

a) the method Apps/develop apps/luup (upload) shows that its done, but does not overwrite the existing files
b) using winscp it overwrites the files with the correct 1.94 ones
c) the Vera is damned slow in reading these files and showing the right protocols and Versions. In my case it did like 10-20 mins
d) I cannot write to the icon path with my login credentials

Anybody else that experience with Veraplus 7.31 and RFXtrx433XL (1042 + 1041) and RFXtrx plugin with 1.87 and 1.94 ? and yes I even powered vera off for some minutes without affecting this

Just something to look into: the uploader at Apps > Develop apps > Luup files installs the files compressed (with .lzo suffix). If there are both compressed and uncompressed plugin files, however, the system will favor the uncompressed. So if you previously copied files up without compression (via scp, for example), you would have both, with potentially confusing results. Check the contents of /etc/cmh-ludl via ssh.

@rigpapa, many thanks, that is my issue. I had both files and with Winscp I was overwriting the 1.87 uncompressed.

1 Like

@Edwin1972 If what you’ve posted is what you’re seeing when attempting to create a new device, then you’re not running the latest version of the plugin files. The drop down should show this:
Somfy devices
Also, have you updated from the beta 3 version directly to version 1.94? If so, the altid for Somfy blinds has changed. If you go to your existing Somfy blinds, select the Advanced tab and then look at Variables, and look at the altid value. It probably starts with WC/RFY. Previously the altid began with WC/RFY/xxxxx/nn It should now begin with WC/RFY.?/xxxxx/nn The RFY.? should be RFY.0 or RFY.3 or RFY.8 or RFY.9. Set the proper one for your Somfy devices according to:

  • RFY.0 = Somfy awning
  • RFY.3 = ASA awning
  • RFY.8 = Somfy US Venetian blind
  • RFY.9 = Somfy European Venetian blind

I am still running version 1.7.4903 on my VP. In light of all the issues that have popped up I’m waiting for the next version which has been promised for this week.

Version 1.94 doesn’t work with somfy

I upload Plugin Update V1.87 to my VeraPLus. With version 1.87 I can add new somfy devices but the old devices doesn’t work. I have removed all my window covers and recreated and paired new devices one by one. It works perfect!

Hello Evel,
“Error executing function RFX_showProtocols(): Cannot read property ‘substr’ of undefined”
Did you find a solution ? I have exactly the same error and could not find a solution (i run plug-in 1.96), also looking at the forum nothing appear in reply to your question. Kind regards

Denis

Hi Denis,
In My case, I upgraded to the last Version of Veraplus and copied the files according Rigpapa‘s suggestion with winscp and path. The path for the png (image) was the wrong path. if the folder, Tinman told us does not exist, create one.
Then it worked for me after a reboot.
regards
Michael

dbruckert - In the Vera UI select the RFXtrx device and click the Help tab. Are the Plugin version, Firmware version and Firmware type displayed?

Hello Tinman
No nothing is displayed (I’ve tried uploading everything with WinSCP but it did not solve the issue)

Plugin version:
RFXtrx firmware:
RFXtrx firmware type:
RFXtrx hardware:
Wiki: link
Micasaverde Forum: link
Forum Toute La Domotique: link

I don’t think the RFXtrx is communicating with the Vera hub. Are you able to set up the serial port configuration successfully?

Thanks Tinman Yes I think it is working since I receive Msg which are changing from time to time
image


What version of the plugin were you using before upgrading?

Did you upload all the files and did you upload them using the Vera UI → Apps → Develop Apps → Upload button?

Are you uploading the files from the latest version Plugin update Version 1.96 - #21 by tinman - USB RFXtrx Transceiver - Ezlo Community

I had a very old version (PLUG IN 1.0).
Then I updated to Trunk158 it did not work. I found the 1.96, updated to 1.96 using Vera UI → Apps → Develop Apps → Upload, did not work (same issue RFX_showProtocols()…). So I tried with WinSCP and copied the files uncompressed and removed all compressed files to avoid any mismatch. And at the end I removed again everything and uploaded using Vera UI → Apps → Develop Apps → Upload. So in theory I should have a clean 1.96 update in /etc/cmh-ludl/
Below the content of cmh-ludl in cases something is missing.
Thanks a lot for your help

-rw-r–r-- 1 root root 479 Jan 30 13:42 S_ScaleSensor1.xml.lzo
-rw-r–r-- 1 root root 393 Jan 30 13:42 S_SecurityRemote1.xml.lzo
-rw-r–r-- 1 root root 419 Jan 30 13:42 S_UvSensor1.xml.lzo
-rw-r–r-- 1 root root 566 Jan 30 13:42 S_WindSensor1.xml.lzo
-rw-r–r-- 1 root root 242 Jan 30 13:42 S_X10ChaconRemote1.xml.lzo
-rw-r–r-- 1 root root 496 Jan 30 13:42 S_BarometerSensor1.xml.lzo
-rw-r–r-- 1 root root 248 Jan 30 13:42 S_LWRFRemote1.xml.lzo
-rw-r–r-- 1 root root 425 Jan 30 13:42 S_RFXMetering1.xml.lzo
-rw-r–r-- 1 root root 2661 Jan 30 13:42 S_RFXtrx.xml.lzo
-rw-r–r-- 1 root root 662 Jan 30 13:42 S_RainSensor1.xml.lzo
-rw-r–r-- 1 root root 58358 Jan 30 13:42 L_RFXtrx.lua.lzo
-rw-r–r-- 1 root root 278 Jan 30 13:42 S_ATIRemote1.xml.lzo
drwxr-xr-x 2 root root 0 Jan 30 13:42 .
-rw-r–r-- 1 root root 415 Jan 30 13:42 D_X10ChaconRemote1.xml.lzo
-rw-r–r-- 1 root root 2044 Jan 30 13:42 I_RFXtrx.xml.lzo
-rw-r–r-- 1 root root 23377 Jan 30 13:42 J_RFXtrx.js.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:42 RFXtrx433E.png.lzo
-rw-r–r-- 1 root root 5450 Jan 30 13:42 S_AlarmPartition2.xml.lzo
-rw-r–r-- 1 root root 415 Jan 30 13:42 D_SwitchToggle1.xml.lzo
-rw-r–r-- 1 root root 1619 Jan 30 13:42 D_UvSensor1.json.lzo
-rw-r–r-- 1 root root 401 Jan 30 13:42 D_UvSensor1.xml.lzo
-rw-r–r-- 1 root root 2076 Jan 30 13:42 D_WindSensor1.json.lzo
-rw-r–r-- 1 root root 415 Jan 30 13:42 D_WindSensor1.xml.lzo
-rw-r–r-- 1 root root 1560 Jan 30 13:42 D_X10ChaconRemote1.json.lzo
-rw-r–r-- 1 root root 648 Jan 30 13:42 D_RFXtrx.xml.lzo
-rw-r–r-- 1 root root 2031 Jan 30 13:42 D_ScaleSensor1.json.lzo
-rw-r–r-- 1 root root 397 Jan 30 13:42 D_ScaleSensor1.xml.lzo
-rw-r–r-- 1 root root 3860 Jan 30 13:42 D_SecurityRemote1.json.lzo
-rw-r–r-- 1 root root 541 Jan 30 13:42 D_SecurityRemote1.xml.lzo
-rw-r–r-- 1 root root 951 Jan 30 13:42 D_SwitchToggle1.json.lzo
-rw-r–r-- 1 root root 1727 Jan 30 13:42 D_RFXMeter1.json.lzo
-rw-r–r-- 1 root root 402 Jan 30 13:42 D_RFXMeter1.xml.lzo
-rw-r–r-- 1 root root 765 Jan 30 13:42 D_RFXtrx.json.lzo
-rw-r–r-- 1 root root 391 Jan 30 13:42 D_RainSensor1.xml.lzo
-rw-r–r-- 1 root root 409 Jan 30 13:42 D_LWRFRemote1.xml.lzo
-rw-r–r-- 1 root root 1603 Jan 30 13:42 D_RainSensor1.json.lzo
-rw-r–r-- 1 root root 1390 Jan 30 13:42 D_ATIRemote1.json.lzo
-rw-r–r-- 1 root root 408 Jan 30 13:42 D_ATIRemote1.xml.lzo
-rw-r–r-- 1 root root 2116 Jan 30 13:42 D_BarometerSensor1.json.lzo
-rw-r–r-- 1 root root 397 Jan 30 13:42 D_BarometerSensor1.xml.lzo
-rw-r–r-- 1 root root 1632 Jan 30 13:42 D_LWRFRemote1.json.lzo
drwxr-xr-x 1 root root 0 Jan 30 13:26 …
-rw-r–r-- 1 root root 3195 Jan 30 13:18 D_Fan0.json.lzo
-rw-r–r-- 1 root root 406 Jan 30 13:18 D_Fan1.xml.lzo
-rw-r–r-- 1 root root 2932 Jan 30 13:18 D_Fan2.json.lzo
-rw-r–r-- 1 root root 3538 Jan 30 13:18 D_Fan5.json.lzo
-rw-r–r-- 1 root root 459 Jan 30 13:18 S_Fan1.xml.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon4.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon4L.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon5.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon5L.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon6.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon6L.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon2.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon2L.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon3.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon3L.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon1.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon1L.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon0.png.lzo
-rw-r–r-- 1 root root 16 Jan 30 13:18 FanIcon0L.png.lzo
-rw-r–r-- 1 root root 2667 Jan 30 13:18 D_WindowCovering2.json.lzo
-rw-r–r-- 1 root root 2547 Jan 30 13:18 D_WindowCovering3.json.lzo
-rw-r–r-- 1 root root 2544 Jan 30 13:18 D_WindowCovering4.json.lzo
-rw-r–r-- 1 root root 3086 Jan 30 13:18 D_Fan11.json.lzo
-rw-r–r-- 1 root root 2967 Jan 30 13:18 D_Fan12.json.lzo
-rw-r–r-- 1 root root 3285 Jan 30 13:18 D_Fan7.json.lzo
-rw-r–r-- 1 root root 3198 Jan 30 13:18 D_Fan8.json.lzo
-rw-r–r-- 1 root root 3258 Jan 30 13:18 D_Fan9.json.lzo
-rw-r–r-- 1 root root 2455 Dec 12 21:05 D_IPX800_UI7.json.lzo
-rw-r–r-- 1 root root 8503 Dec 12 21:05 L_IPX800json.lua.lzo
-rw-r–r-- 1 root root 588 Dec 12 21:05 D_IPX800.xml.lzo
-rw-r–r-- 1 root root 527 Dec 12 21:05 S_IPX800.xml.lzo
-rw-r–r-- 1 root root 2591 Dec 12 21:05 xpath.lua.lzo
-rw-r–r-- 1 root root 2220 Dec 12 21:05 D_IPX800.json.lzo
-rw-r–r-- 1 root root 783 Dec 12 21:05 I_IPX800.xml.lzo
-rw-r–r-- 1 root root 6318 Dec 12 21:05 J_IPX800.js.lzo
-rw-r–r-- 1 root root 15403 Dec 12 21:05 L_IPX800.lua.lzo
-rw-r–r-- 1 root root 10203 Nov 14 04:12 ezviz_video_uploader_mms.lua.lzo
-rw-r–r-- 1 root root 2762 Nov 14 04:12 D_DoorbellCamera.json.lzo
-rw-r–r-- 1 root root 510 Nov 14 04:12 ezviz_crypto.lua.lzo
-rw-r–r-- 1 root root 10196 Nov 14 04:12 ezviz_video_uploader_ezlo.lua.lzo
-rw-r–r-- 1 root root 958 Nov 14 04:12 L_EzvizUtils.lua.lzo
-rw-r–r-- 1 root root 7 Nov 14 04:12 ezviz_config_loader.lua.lzo
-rw-r–r-- 1 root root 537 Nov 14 04:12 ezviz_logger.lua.lzo
-rw-r–r-- 1 root root 6044 Nov 14 04:12 L_EzvizGlobal.lua.lzo
-rw-r–r-- 1 root root 3178 Nov 14 04:12 ezviz_http.lua.lzo
-rw-r–r-- 1 root root 8496 Nov 14 04:12 ezviz_video_manager.lua.lzo
-rw-r–r-- 1 root root 286 Nov 14 04:12 L_EzvizLogger.lua.lzo
-rw-r–r-- 1 root root 595 Nov 14 04:12 S_EzvizCamera.xml.lzo
-rw-r–r-- 1 root root 1793 Nov 14 04:12 ezviz_config.lua.lzo
-rw-r–r-- 1 root root 3911 Nov 14 04:12 ezviz_event_listener.lua.lzo
-rw-r–r-- 1 root root 951 Nov 14 04:12 I_EzvizCamera.xml.lzo
-rw-r–r-- 1 root root 24161 Nov 14 04:12 L_EzvizCamera.lua.lzo
-rw-r–r-- 1 root root 500 Nov 14 04:12 D_EzvizCamera.xml.lzo
-rw-r–r-- 1 root root 951 Nov 4 23:57 I_SercommIPCamera.xml.lzo
-rw-r–r-- 1 root root 10203 Sep 7 18:09 ezviz_video_uploader.lua.lzo
-rw-r–r-- 1 root root 1759 Jun 6 2020 D_G550Siren.json.lzo
-rw-r–r-- 1 root root 457 Jun 6 2020 D_G550Siren.xml.lzo
-rw-r–r-- 1 root root 423 Jun 6 2020 S_G550Siren.xml.lzo
-rw-r–r-- 1 root root 259 Jun 6 2020 I_G550Siren.xml.lzo
-rw-r–r-- 1 root root 6736 Jun 6 2020 L_G550Siren.lua.lzo
-rw-r–r-- 1 root root 472 Jun 6 2020 siren_configuration.lua.lzo
-rw-r–r-- 1 root root 1775 Apr 29 2020 D_MotionSensor_Camera.json.lzo
-rw-r–r-- 1 root root 38849 Apr 29 2020 L_SercommIPCamera.lua.lzo
-rw-r–r-- 1 root root 777 Apr 29 2020 L_SercommIPCameraManager.lua.lzo
-rw-r–r-- 1 root root 4505 Apr 29 2020 sercomm_configuration_mios.lua.lzo
-rw-r–r-- 1 root root 634 Apr 29 2020 D_SercommIPCamera.xml.lzo
-rw-r–r-- 1 root root 820 Apr 29 2020 S_SercommIPCamera.xml.lzo
-rw-r–r-- 1 root root 327 Apr 16 2020 D_SmartHomeHelper.xml.lzo
-rw-r–r-- 1 root root 130 Apr 16 2020 I_SmartHomeHelper.xml.lzo
-rw-r–r-- 1 root root 9555 Apr 16 2020 L_SmartHomeHelper.lua.lzo
-rw-r–r-- 1 root root 15602 Sep 24 2019 L_AmazonAlexaHelper.lua.lzo
-rw-r–r-- 1 root root 410 Feb 15 2019 S_HouseModes.xml.lzo
-rw-r–r-- 1 root root 491 Feb 15 2019 I_HouseModes.xml.lzo
-rw-r–r-- 1 root root 2080 Feb 15 2019 L_HouseModes.lua.lzo
-rw-r–r-- 1 root root 2089 Feb 15 2019 D_HouseModes.json.lzo
-rw-r–r-- 1 root root 480 Feb 15 2019 D_HouseModes.xml.lzo
-rw-r–r-- 1 root root 3335 Sep 11 2018 iconIPX800_0.png
-rw-r–r-- 1 root root 3349 Sep 11 2018 iconIPX800_100.png
-rw-r–r-- 1 root root 3187 Sep 11 2018 iconIPX800.png
-rw-r–r-- 1 root root 3778 Jan 7 2018 D_MString.json.lzo
-rw-r–r-- 1 root root 3778 Jan 7 2018 D_MString_UI7.json.lzo
-rw-r–r-- 1 root root 576 Jan 7 2018 D_MString.xml.lzo
-rw-r–r-- 1 root root 1894 Jan 7 2018 I_MString.xml.lzo
-rw-r–r-- 1 root root 794 Jan 7 2018 S_MString.xml.lzo
-rw-r–r-- 1 root root 644 Jan 7 2018 I_StateDevice2.xml.lzo
-rw-r–r-- 1 root root 665 Jan 6 2018 D_StateDevice2.xml.lzo
-rw-r–r-- 1 root root 467 Jan 6 2018 D_BinaryLight2.xml.lzo
-rw-r–r-- 1 root root 2540 Jan 6 2018 D_BinaryLight2.json.lzo
-rw-r–r-- 1 root root 1252 Jan 6 2018 I_BinaryLight2.xml.lzo
-rw-r–r-- 1 root root 1253 Jan 6 2018 I_VSwitch4.xml.lzo
-rw-r–r-- 1 root root 371 Jan 6 2018 I_BL6.xml.lzo
-rw-r–r-- 1 root root 1233 Jan 6 2018 I_VSwitch4.lzo
-rw-r–r-- 1 root root 3973 Jan 5 2018 D_MSwitch631.json.lzo
-rw-r–r-- 1 root root 589 Jan 5 2018 D_MSwitch631.xml.lzo
-rw-r–r-- 1 root root 594 Jan 5 2018 D_MSwitch.xml.lzo
-rw-r–r-- 1 root root 4419 Jan 5 2018 I_MSwitch.xml.lzo
-rw-r–r-- 1 root root 1277 Jan 5 2018 S_MSwitch.xml.lzo
-rw-r–r-- 1 root root 3876 Jan 5 2018 D_MSwitch.json.lzo
-rw-r–r-- 1 root root 3876 Jan 5 2018 D_MSwitch_UI7.json.lzo
-rw-r–r-- 1 root root 665 Jan 4 2018 D_VSwitch.xml.lzo
-rw-r–r-- 1 root root 1065 Jan 4 2018 I_VSwitch.xml.lzo
-rw-r–r-- 1 root root 2136 Jan 4 2018 D_VSwitch.json.lzo
-rw-r–r-- 1 root root 798 Jan 4 2018 S_VSwitch.xml.lzo
-rw-r–r-- 1 root root 2288 Jan 4 2018 D_VSwitch_UI7.json.lzo
-rw-r–r-- 1 root root 932 Dec 7 2017 D_Doorbell1.json.lzo
-rw-r–r-- 1 root root 315 Dec 7 2017 D_Doorbell1.xml.lzo
-rw-r–r-- 1 root root 336 Dec 7 2017 S_Doorbell1.xml.lzo
-rw-r–r-- 1 root root 836 Apr 30 2017 D_SmtpNotification.json.lzo
-rw-r–r-- 1 root root 569 Apr 30 2017 D_SmtpNotification.xml.lzo
-rw-r–r-- 1 root root 420 Apr 30 2017 I_SmtpNotification.xml.lzo
-rw-r–r-- 1 root root 3315 Apr 30 2017 J_SmtpNotification.js.lzo
-rw-r–r-- 1 root root 3820 Apr 30 2017 L_SmtpNotification.lua.lzo
-rw-r–r-- 1 root root 644 Apr 30 2017 S_SmtpNotification.xml.lzo
-rw-r–r-- 1 root root 24 Apr 30 2017 smtps.lua.lzo
-rw-r–r-- 1 root root 16 Apr 30 2017 icon.png.lzo
-rw-r–r-- 1 root root 628 Apr 29 2017 D_SurveillanceStationRemote1.xml.lzo
-rw-r–r-- 1 root root 1546 Apr 29 2017 J_SurveillanceStationRemote1.js.lzo
-rw-r–r-- 1 root root 1255 Apr 29 2017 D_SurveillanceStationRemote1.json.lzo
-rw-r–r-- 1 root root 309 Apr 29 2017 I_SurveillanceStationRemote1.xml.lzo
-rw-r–r-- 1 root root 773 Apr 29 2017 S_SurveillanceStationRemote1.xml.lzo
-rw-r–r-- 1 root root 4785 Apr 29 2017 L_SurveillanceStationRemote1.lua.lzo
-rw-r–r-- 1 root root 211 Apr 21 2016 I_SysMon.xml.lzo
-rw-r–r-- 1 root root 379 Apr 21 2016 D_SysMon.xml.lzo
-rw-r–r-- 1 root root 413 Apr 21 2016 S_SysMon.xml.lzo
-rw-r–r-- 1 root root 2023 Apr 21 2016 D_SysMon.json.lzo
-rw-r–r-- 1 root root 2009 Apr 21 2016 L_SysMon.lua.lzo
-rw-r–r-- 1 root root 275 Nov 5 2015 D_iDoorContact.json.lzo
-rw-r–r-- 1 root root 1295 Nov 5 2015 I_iDoorContact.xml.lzo
-rw-r–r-- 1 root root 312 Nov 5 2015 D_iDoorContact.xml.lzo
-rw-r–r-- 1 root root 2402 Aug 21 2015 D_Karotz1.json.lzo
-rw-r–r-- 1 root root 656 Aug 21 2015 D_Karotz1.xml.lzo
-rw-r–r-- 1 root root 3451 Aug 21 2015 I_Karotz1.xml.lzo
-rw-r–r-- 1 root root 366 Aug 21 2015 S_Karotz1.xml.lzo
-rw-r–r-- 1 root root 30753 May 30 2015 extra_ergy_files.tar.gz
-rw-r–r-- 1 root root 3560 May 30 2015 J_EchoEnergyManager2.js.lzoenc
-rw-r–r-- 1 root root 715 May 30 2015 J_EchoEnergyManager.json.lzo
-rw-r–r-- 1 root root 50748 May 30 2015 L_EchoEnergyManager.lua.lzoenc
-rw-r–r-- 1 root root 13058 May 30 2015 J_EchoEnergyManager.js.lzoenc
-rw-r–r-- 1 root root 577 May 30 2015 S_EchoEnergyManager.xml.lzo
-rw-r–r-- 1 root root 526 May 30 2015 I_EchoEnergyManager.xml.lzoenc
-rw-r–r-- 1 root root 734 May 30 2015 D_EchoEnergyManager.xml.lzo
-rw-r–r-- 1 root root 1233 Jun 5 2014 I_VSwitch5.xml.lzo.xml.lzo
-rw-r–r-- 1 root root 1761 Sep 29 2013 J_VContainer.js.lzo
-rw-r–r-- 1 root root 1048 Sep 29 2013 S_VContainer.xml.lzo
-rw-r–r-- 1 root root 577 Sep 29 2013 D_VContainer.xml.lzo
-rw-r–r-- 1 root root 947 Sep 29 2013 I_VContainer.xml.lzo
-rw-r–r-- 1 root root 2645 Sep 29 2013 D_VContainer.json.lzo
-rw-r–r-- 1 root root 572 May 25 2013 D_VSwitch4.xml.lzo
-rw-r–r-- 1 root root 5941 May 4 2013 I_VistaCamPT.xml.lzo
-rw-r–r-- 1 root root 4877 May 4 2013 I_FoscamPTZ.xml.lzo
-rw-r–r-- 1 root root 665 Apr 28 2013 D_StateDevice.xml.lzo
-rw-r–r-- 1 root root 494 Apr 28 2013 I_StateDevice.xml.lzo
-rw-r–r-- 1 root root 1214 Jan 6 2013 D_LightSensor1.json.lzo
-rw-r–r-- 1 root root 294 Nov 11 2012 S_DataMine1.xml.lzo
-rw-r–r-- 1 root root 15275 Nov 11 2012 L_DataMine1.lua.lzo
-rw-r–r-- 1 root root 378 Nov 11 2012 D_DataMine1.xml.lzo
-rw-r–r-- 1 root root 192 Nov 11 2012 I_DataMine1.xml.lzo
-rw-r–r-- 1 root root 917 Nov 11 2012 D_DataMine1.json.lzo
-rw-r–r-- 1 root root 3102 Nov 4 2012 J_DataMine1.js.lzo
-rw-r–r-- 1 root root 13 Oct 20 2012 tags_alpha6-40.zip.lzo
-rw-r–r-- 1 root root 13 Oct 18 2012 tags_alpha5-40.zip.lzo

Hi dbruckert.

Did you find a solution to the problem?

I have exactly the same problem on Vera Lite.