Release Notes - RTOS Firmware (Atom) v8.120

Improvements:

  • Additional improvements to Reachable / Unreachable states for Z-Wave devices.

Newly integrated devices:

  1. Zlink Plug-In Dimmer PD-100
  2. Honeywell Z-Wave Thermostat YTH8320ZW1007
  3. Honeywell In-Wall Tamper Resistant Outlet ZW1002/39349
  4. HomeSeer Floodlight Sensor HS-FLS100+
  5. Aeotec Recessed Door Sensor ZW089
  6. GE In-Wall Smart Dimmer 14294 / ZW3005
  7. Nexia Temperature & Humidity Sensor TH100NX
  8. HomeSeer Flex Sensor HS-FS100+
  9. Evolve Dual Outlet Receptacle LOM-15

Newly integrated devices with known issues:

  1. Hank HKZW-RGB01 RGB Bulb
  2. Ring Range Extender
  3. Honeywell 39339/ZW3107 Plug-in Smart Dimmer
  4. Honeywell Plug-in Switch (Single Plug) ZW4103/39337
  5. Honeywell Plug-in Outdoor Switch ZW4201/39346
  6. Zipato rgbw2 us Bulb
  7. Leviton DZ6HD Dimmer
  8. Zooz Zen27 S2 Dimmer
  9. Aeotec LED Bulb 6 Multi-White ZWA001-A
  10. Aeotec ZWA002 LED Bulb 6:Multi-Colour
  11. Evolve Plug-In Module LPM-15
  12. Aeotec ZW121 LED Strip
  13. Yale YRD240 Touchscreen Deadbolt (No support yet for PIN codes, restrictions and notifications)
  14. Schlage BE469NX Touchscreen Deadbolt (No support yet for PIN codes, restrictions and notifications)
  15. Fibaro Double Switch 2 FGS-223
  16. Enerwave IN-Wall Smart Meter TR Duplex Receptacle ZW15RM-PLUS
  17. Ecolink Z-Wave Plus Smart Switch - Double Rocker DDLS2-ZWAVE5
  18. Ecolink Z-Wave Plus Smart Switch - Single Rocker SDLS2-ZWAVE5
  19. Remotec US Binary Switch ZFM-80
  20. GE Plug-in Smart Switch ZW4103/28169
  21. HomeSeer Z-Wave Plus Door/Window Sensor HS-DS100+
  22. Ecolink Garage Door Tilt Sensor TILTZWAVE2.5-ECO
  23. GE Plug-in Smart Switch, Dual Plug ZW4106/14282

Known issues on newly integrated devices:

  • Issues on the Hank HKZW-RGB01 RGB Bulb with the status of the device not being updated when controlling the device manually and the light-bulb icon does not distinguish from background when is set to 100% white.
  • Issues with Range extenders / repeaters being displayed as generic devices.
  • Issues on the zipato rgbw2 us Bulb where the color settings are not retained when creating a scene with action using a colored bulb.
  • Issues on the Leviton DZ6HD Dimmer with the status of the device not being updated when controlling the device manually .
  • Issues on the Zooz Zen27 S2 Dimmer with the status of the device not being updated when controlling the device manually.
  • Issue on Aeotec ZWA001-A with not being able to switch to warm/cold white.
  • Issue with the ON/OFF state not being persisting when creating a scene with action using a dimmer.
  • Issue on Aeotec LED Bulb 6 Multi-White ZWA001-A with the light-bulb icon does not distinguish from background when is set to 100% white.
  • Issues with Evolve Plug-In Module LPM-15 being detected as a in-wall switch.
  • Issues with no updated RGB values for Aeotec ZW121.
  • Issue with no instant status for the ‘child’ devices created for Fibaro FGS-223.
  • Issues with Fibaro Single Switch 2 FGS-223 being recognized as an outdoor switch.
  • Inconsistency for Aeotec ZW139 Nano Switchicon on iOS icon.
  • Issue with Honeywell Plug-in Switch (Single Plug) ZW4103/39337 being detected as a in-wall switch.
  • Issue on Ecolink Z-Wave Plus Smart Switch - Single Rocker SDLS2-ZWAVE5 where the battery low warning is displayed as 100%
  • Issue with the Color of RGB bulbs not being persisted.
  • Issue with Ecolink Garage Door Tilt Sensor TILTZWAVE2.5-ECO being detected as a door/window sensor.

Other known issues:

  • Issue with no events being generated when tampering a security sensor.
  • Issue with armed and tripped leak / flood sensors don’t notify users
  • Issue with the controller resetting to factory defaults after multiple actions that are causing a crash.
1 Like

© 2019 Vera Control Ltd., All Rights Reserved. Terms of Use | Privacy Policy