UPDATE:
PLEG Version 9.1 was published on 27th of October unfortunately there is a problem with this plugin version and it beaks PLEG, resulting in a “Error Reading Data” message.
The 3rd party developer of PLEG is aware and is working on a fix to be published.
Vera support are also aware.
You can downgrade to the previous version of PLEG by following these instructions, once downgraded you need to uncheck auto update on the PLEG apps.
The previous app version were these:
Program Logic Core (PLC) = 8.23
Program Logic Event Generator (PLEG) = 8.11
OK, for those you using PLEG here are the two URLs you need to request to downgrade (without restoring Vera from a backup) to version 8.
You request these in your browser (not via remote access – must be local). Put your Vera local IP in where indicated. Vera will reload after each request, so give it time between requests to do that. After each request, run to Apps > My apps and turn off auto-update for the PLEG apps.
http://vera-ip:3480/data_request?id=action&serviceId=urn:micasaverde-com:serviceId:HomeAutomationGateway1&action=CreatePlugin&PluginNum=3086&Version=36632
http://vera-ip:3480/data_request?id=action&serviceId=urn:micasaverde-com:serviceId:HomeAutomationGateway1&action=CreatePlugin&PluginNum=3066&Version=31846
If you use PLTS, you will also need to do this one:
http://192.168.0.21:3480/data_request?id=action&serviceId=urn:micasaverde-com:serviceId:HomeAutomationGateway1&action=CreatePlugin&PluginNum=3018&Version=31866
THANKS to @rigpapa for figuring out how to find the version numbers we needed in order to be able to downgrade the PLEG apps.
Also THANKS to @shallowearth and @cadwizzard for their contributions.
END OF UPDATE
UPDATE 2
It looks like a version 9.5 fix has been published and is working see here.
END OF UPDATE
I can’t load any of my PLEG devices in Vera it says “Error Reading Data”
This has happened on both my Vera Plus 1.7.5186 (7.31) and Vera Edge 1.7.5245 (7.32) .
In the log for the Vera Plus I am seeing these which are my three PLEG devices:
LuImplementation::StartLua skipping device 86 implementation valid 1 <0x76b50520>
LuImplementation::StartLua skipping device 104 implementation valid 1 <0x76b50520>
LuImplementation::StartLua skipping device 191 implementation valid 1 <0x76b50520>
On the Vera Edge in My Apps I tried “updating” the PLEG apps to download / install the plugin files again and then reloaded the LUUP Engine but its still the same.
For this to happen on two Vera controllers at the same time is highly unusual and suggests I don’t have corruption issues etc.
Anyone else’s PLEG died ?
I think it was working this morning OK as my window coverings opened themselves via PLEG schedules.