Hello everybody
just to let you know I upgraded my vera secure to the 1.7.4834 firmware.
it took about 16 minutes but worked fine. of course this is not the experience we see on the forum but it worked ok for me
Just to let you know ALTUI seems to work fine on it too. I will post in a couple of day if I see something weird. Please do use latest versions (AltUI v2.46.2535) as there is some changes in read/write access on some folders that I have made for this firmware release
I do end up with a significant change in terms of disk use ( I do not use extroot , so I was on plain vanilla setup with a partition used at about 80% ) , now I get
Filesystem Size Used Available Use% Mounted on
rootfs 10.8M 1.0M 9.7M 10% /
/dev/root 7.8M 7.8M 0 100% /rom
tmpfs 250.8M 2.1M 248.7M 1% /tmp
/dev/mtdblock6 10.8M 1.0M 9.7M 10% /overlay
overlayfs:/overlay 10.8M 1.0M 9.7M 10% /
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock10 50.0M 12.9M 37.1M 26% /storage
/dev/mtdblock10 50.0M 12.9M 37.1M 26% /etc/cmh-firmware
/dev/mtdblock10 50.0M 12.9M 37.1M 26% /etc/cmh-backup
/dev/mtdblock9 10.0M 10.0M 0 100% /mios
/dev/mtdblock10 50.0M 12.9M 37.1M 26% /etc/cmh-ludl
/dev/mtdblock11 19.3M 1.5M 17.8M 8% /ezmi
/dev/mtdblock11 19.3M 1.5M 17.8M 8% /etc/cmh