I can confirm this works, on the Ezlo hub in the Vera app, I can now arm and disarm security sensors OK that reside on the Vera hub…
However as you said we really need the armed / disarmed status of the security sensor to be reflected from the Vera hub into the Ezlo hub.
I do hope that they add this functionality in to the API for us !
Who did you ask at Ezlo about it ?
UPDATE - Trying this again today 09/08/23 and it seems to have stopped working. When in the Android Vera mobile app connected to my Ezlo Plus and I press the Arm / Disarm button on a bridge motion sensor nothing happens.
The github version is updates and has the dimmer_rgb and window_cov added. The heater is added but I cannot get the controls to show, it now only displays the CurrentTemperature. Siren is added, but not tested.
The percentage slider 0% to 100% works and opens and closes my curtains.
The up and down buttons work OK and change the percentage in 5% increments.
However the Stop button doesn’t seem to work at all and neither does the Open or Close buttons. I think this is an Ezlo problem however not with your bridge plugin.
Cheers.
UPDATE - Tested again today 09/08/23 and the Stop button does now work OK.
However Roller Shutter Up / Down buttons only go in 5% increments, I think this is wrong. As on the Vera hub when you press Up or Down the curtains / blinds just go in that direction until you press the Stop button or until the motor limit is reached.
I have edited the VeraBridge.json file and added a “Siren” device. Its added the device seemingly OK in to the Vera mobile app, however when I press the button to turn on / sound the siren, nothing happens the button in the GUI does not change to “ON”. The app does popup and say “Command Sent” however.
RGB Dimmer devices. I added two lamps which are Philips Hue bulbs connected to the Vera Plus via the AltHue plugin.
These lights are added in to the Ezlo Plus as RGB Dimmer devices OK, I now see a colour circle picker next to the device in the Vera app.
However selecting colours from this picker and the bulbs do not change colour at all. Again likely a problem with the device in Ezlo hub rather than your bridge plugin.
I then added a Fibaro RGBW device instead and that device doesn’t change the colours either.
Also a tip when downloading the new files from github, don’t over write your existing VeraBridge.json file or you will lose all the virtual devices on the Ezlo Hub, you have previously configured in that file, if you run the load plugin command.
I did this once and had to start over again adding in all the devices I wanted in the .json file again.
For the same blind when the Vera mobile app is connected to my Vera Plus instead, pressing the Up button the blinds moves up until you press the stop button.
Likewise pressing down button, the blind moves down until you press the stop button.
However these 5% increments on the Ezlo Plus hub is totally pointless if you ask me.
i installed the plugin and it works great for the short time that i tested it, at the moment i have included around 24 motion and door contacts that are from paradox plugin in vera, and around 35 Zwave dimmers, switches, motion, temperature, humidity and smoke sensors, and arround 40 zwave Dimmers and switches on the way.
I have one question for the community, is somebody working on a plugin for the oposite direction, to include ezlo zwave devices in vera as virtual devices?