Improvements:
- Improved process for the inclusion of S2 Security Devices
Fixes:
- Fixed the issue with the pairing process is not complete on Fibaro Dimmer 2 FGD-212.
- Fixed the issues with the Color of RGB bulbs not being persisted.
- Fixed the issues with not being able to pair Cooper GEN3 devices, issues that was reproducing on Cooper RFLDM, Cooper RFAPM and Cooper RF9537-N.
- Fixed the issues with the ON/OFF status not changing in app for Zooz ZEN06 Z-Wave Plus Smart Plug when pushing the physical button on the device
Newly integrated devices:
- Decora Z-wave Controls DZPD3 Plug In Dimmer
- Philio Multisensor PAT02-2B
- Vizia RF+ VRF01 Scene Capable Quiet Fan Speed Control
- Intermatic Motion Sensor CA9000
- Fibaro Door/Window Sensor FGK-10x
- Vizia RF+ VRE06_0810 Low Voltage Scene Capable Dimmer
- HomeSeer Fan Controller HS-FC200+
- HomeSeer Wall Dimmer HS-WD200+
- Aspire RF Wireless by Eaton Wiring RF9537-N 1000W ELV/FLR Smart Dimmer (With no DPW)
- ASPIRE RF Wireless by Eaton Wiring RF9534 600W Incandescent Smart Dimmer (With no DPW)
- ASPIRE RF Wireless by Eaton Wiring RF9536 1000W Incandescent Smart Dimmer (With no DPW)
- ASPIRE RF Wireless by Eaton Wiring RFAPM Plug-in Module (with no DPW)
- Satco In-Wall Dimmer 86-103
- Honeywell 39336/ZW3104 Plug-in Dimmer
- Zooz Outdoor Motion Sensor ZSE29 (with no DPW)
- GE In-Wall Smart Fan Control ZW4002/14287
- Radio Thermostat CT100 Thermostat
- Evolve Plug-in Dimmer LDM-15
- Zlink Plug-In Appliance and Lightning Module PA-100
- GE/Jasco Outdoor Switch 14284/ZW4201
- Leviton 1000W Dimmer DZ1KD
- Philio Slim Multisensor PST02-A
- GE/Jasco Portable Smart Motion Sensor ZW6302
- Ge/Jasco Hinge Pin Door Sensor ZW6301/35263
- GoControl WS15Z5-1 Z-Wave Wall Switch
- GoControl WO15Z-1 Z-Wave Single Wall Outlet
- Enerwave Plug-In Appliance Module ZWN-333M (with no DPW)
- Hank Smart Plug Hank HKZW-SO01 (with no DPW)
- Hank Smart Switch HKZW-SW02 (With no DPW)
- GE 14280/ZW3107 Plug-in Smart Dimmer, Dual Plug With Simultaneous Control (with No DPW)
- Yale NTB620-ZW2 nexTouch Wireless Touchscreen (with no DPW)
- Aeotec Heavy Duty Smart Switch ZW078
- Sercomm Z-Wave Energy Switch SW-ESW01N
- Leviton VRR15_0806 Scene Capable Receptacle
- Zooz ZEN15 Power Switch
- Eaton RF9640 Universal Dimmer (With no DPW)
- HomeSeer Wall Switch HS-WS200+
- Satco 86-102 In-Wall Switch
- Kwikset 916 SmartCode Touchscreen Deadbolt (No DPW and with no pin codes, restrictions and notifications functionality supported yet)
- Kwikset 888 SmartCode Deadbolt (No DPW and with no pin codes, restrictions and notifications functionality supported yet)
- Yale YRD216 Push Button Deadbolt (With no pin codes, restrictions and notifications functionality supported yet)
- Westinghouse 8001 RTS-Z Push Button Lever Lock (With no pin codes, restrictions and notifications functionality supported yet)
- Yale YRD246 Touchscreen Deadbolt (With no pin codes, restrictions and notifications functionality supported yet)
- Alfred DB2 Touchscreen Deadbolt (With no pin codes, restrictions and notifications functionality supported yet)
- Yale YRD256 Touchscreen Deadbolt ((With no pin codes, restrictions and notifications functionality supported yet)
Note: Some of these devices do not yet have Device Pairing Wizards in the Vera App. The locks (#39-45) do not yet have functionality for pin codes, restrictions, or notifications yet. This is coming soon.
Known issues on newly integrated devices:
The following devices do not have energy reports in the Android app:
Enerwave Plug-In Appliance Module ZWN-333M
Zooz ZEN15 Power Switch
Sercomm Z-Wave Energy Switch SW-ESW01N
Hank Smart Plug HKZW-SO01
Hank Smart Switch HKZW-SW02
Other known issues:
- Aeotec Heavy Duty Smart Switch ZW078: Meter values are not shown in the parent device.
- Eaton RF9640 Universal Dimmer: instant Status is not working when device is included as encrypted
- Eaton RF9640 Universal Dimmer sometimes appearing under another’s manufacturer’s name
Other issues under investigation:
- Issue with no events being generated when tampering a security sensor.
- Issue with armed and tripped leak / flood sensors don’t notify users
- Issue with the controller resetting to factory defaults after multiple actions that are causing a crash.