Zone Status

I installed an EVL-4 and got the zones configured. I can see the armed / disarmed status for each sensor in my vera device control panel but I can’t see when doors or windows are tripped, aka when someone opens a door, vera doesn’t detect anything, no red bars over the top.

Any ideas on what I should check?

Thanks,

Looks like I got it fixed, needed to add the port number on the IP setup

port 4025

These instructions also helped
https://docs.google.com/document/u/2/d/1fRPc1yXVyXltur5LPztZfaK7wzqll_jkMBl_TBFalNY/mobilebasic#heading=h.iqamlpherr13

[quote=“KennyCoolHeat, post:2, topic:199567”]Looks like I got it fixed, needed to add the port number on the IP setup

port 4025

These instructions also helped
https://docs.google.com/document/u/2/d/1fRPc1yXVyXltur5LPztZfaK7wzqll_jkMBl_TBFalNY/mobilebasic#heading=h.iqamlpherr13[/quote]

Yes, Step #15 under "Setting Up your Vera. Glad you got it working!

[quote=“KennyCoolHeat, post:2, topic:199567”]Looks like I got it fixed, needed to add the port number on the IP setup

port 4025

These instructions also helped
https://docs.google.com/document/u/2/d/1fRPc1yXVyXltur5LPztZfaK7wzqll_jkMBl_TBFalNY/mobilebasic#heading=h.iqamlpherr13[/quote]

Quick question - when you arm your alarm panel (via keypad, key fob etc), do the sensor devices set up in Vera change their status to armed - and then unarmed once the alarm is disarmed?

[quote=“jarrodirwin, post:4, topic:199567”][quote=“KennyCoolHeat, post:2, topic:199567”]Looks like I got it fixed, needed to add the port number on the IP setup

port 4025

These instructions also helped
https://docs.google.com/document/u/2/d/1fRPc1yXVyXltur5LPztZfaK7wzqll_jkMBl_TBFalNY/mobilebasic#heading=h.iqamlpherr13[/quote]

Quick question - when you arm your alarm panel (via keypad, key fob etc), do the sensor devices set up in Vera change their status to armed - and then unarmed once the alarm is disarmed?[/quote]

No they do not. The Armed /disarmed you see is for Vera modes and not for your alarm system. You should only see the status change on the device itself.

Best Home Automation shopping experience. Shop at getvera!

© 2020 Vera Control Ltd., All Rights Reserved. Terms of Use | Privacy Policy | Forum Rules